1 April 2015 in Energy Procedia
Empty fruit bunch was considered as substrate for second generation of bioethanol because it consists of lignin, cellulose, and hemicelluloses. For lignocelluloses materials, it usually needs pretreatment and hydrolysis to convert cellulose into glucose. Two methods of enzymatic hydrolysis, Separated Hydrolysis and Fermentation (SHF) and Simultaneous Saccharification and Fermentation (SSF) were carried out in this study. The performance of both SHF and SSF was concerned to evaluate the effect of hydrolysis methods and enzyme concentration for producing ethanol. Pretreatment was conducted in a reactor using 10% sodium hydroxide at temperature 150°C during 30minutes. Two kinds of enzyme, Cellic® CTec2 and Cellic® HTec2 from novozyme were added in 15% (gr/ml) of pretreated EFB at pH 4.8. Four concentration of enzyme Cellic® CTec2, 10, 20, 30, 40 FPU per gram biomass were performed in SHF and SSF processes respectively, while Cellic® HTec2 was added 20% from Cellic® CTec2. Contents of glucose, xylose, and ethanol were recorded every 24hours. Using 40 FPU of concentration enzyme, it could be produce 4.74% of ethanol in 72hours fermentation by SHF process and 6.05% of ethanol in 24hours by SSF process. From this study, the SSF method was considered as a better process than SHF due to rapidly ethanol production and the highest concentration of produced ethanol
23 May 2022 in Jurnal Kimia Sains dan Aplikasi
Lignin, the second most abundant natural polymeric globally, is considered the source of the renewable aromatic compound. It serves as an alternative feedstock for the elaboration of chemicals and polymers. However, even until now, it is still primarily used as a low-value fuel for boilers. In the current research, alkaline lignin was modified and used as an adsorbent for removing lead (Pb) in an aqueous solution. The functionalized alkaline lignin (FAL) was prepared by a Mannich reaction with formaldehyde and dimethylamine, followed by esterification of carbon disulfide. The FAL was characterized using CHN elemental analysis, X-Ray Fluorescence (XRF), Scanning Electron Microscopy (SEM), and Fourier Transform Infrared (FT-IR) to observe the changes in composition, morphology, and chemical structure. The analysis revealed that alkaline lignin was successfully modified using amine and carbon disulfide. The adsorption study shows that the lead concentration reduced to 93.7% after 2 hours in contact with FAL. The FAL adsorption capacity could obtain 0.44 mmol/g of lead.
27 March 2023 in Biomass Conversion and Biorefinery
21 August 2019 in Reaktor
Butanol, a rising star in biofuel, can be produced by two approaches, petrochemically and biologically. Currently, the most promising route for butanol production is by fermentation using Clostridium species through an anaerobic condition. However, similar to other biofuels, feedstock has greatly influenced the production of biobutanol and the search for inexpensive and abundant raw material is an absolute requirement for a cost-effective process. Second-generation biobutanol which is produced from lignocellulosic biomass of agricultural and forestry waste not only meets the requirement but also alleviates competition with food crops and thereby solves the problems of food scarcity from the first generation biobutanol. This paper delivered the latest and update information regarding biobutanol production specifically second-generation biobutanol in terms of production method, recovery, purification, status, and technoeconomic. Keyword: biobutanol, lignocellulose, purification, recovery, technoeconomic
1 January 2024 in AIP Conference Proceedings
Cellulosic biomass is an abundant renewable resource for bio-based chemical products such as liquid sugar. The third most important commercial enzyme in the wor Cellulosic biomass is an abundant renewable resource for bio-based chemical products such as liquid sugar. The third most important commercial enzyme in the wor
1 November 2022 in IOP Conference Series: Earth and Environmental Science
The conventional process of lignocellulosic bioethanol production includes four steps: pretreatment, hydrolysis, fermentation, and purification. Pretreatment is the crucial way to enhance cellulose purity and remove lignin as well as other impurities compounds in biomass. Alkaline explosion is one of the most used pretreatment methods but pulp-produced is still in base condition. This pulp is not suitable as a substrate for enzymatic hydrolysis that needed a pH of 4.5-5.5. Therefore, pulp washing is required for separating pulp with black liquor and obtaining neutral pH pulp before going to hydrolysis. This study explored the washing method of oil palm empty fruit bunch (EFB)-treated with alkaline explosion in bioethanol production. The washing method using freshwater, acid solution, and a combination of freshwater and acid solution was investigated. As a result, the washing used freshwater needed the highest of water and wash cycles. The washing method using acid solution could obtain neutral pulp in two cycles wash step or more, thus, requiring higher acid consumption. The washing with combination method provided neutral pulp with fewer wash cycles, water, and acid. This method also provided the highest glucose and ethanol concentration. Therefore, the combination washing method is considered more efficient, economical, and environmentally for EFB pulp washing in bioethanol production.