10 September 2024 in Cogent Engineering
Various studies have been conducted to improve the tribological performance of thrust bearings. In the present study, thermohydrodynamic (THD) analysis was carried out to explore the performance of textured thrust bearings with rectangular dimples in three dimensions, considering turbulence and cavitation. Various models are available for predicting turbulence. Owing to disparities in forcing viscosity, velocity fluctuation, and parameter estimation, the performance of these models is typically distinct. Model comparison is the simplest method for identifying the strengths, limitations, and sources of uncertainty in a model. In this study, the k-ω turbulence model was of particular interest. Four k-ω models, namely, the standard k-ω model, BSL (Baseline) k-ω model, SST (shear-stress transport) k-ω model, and GEKO (Generalized k-Omega) k-ω model, were evaluated to predict the bearing characteristics. In this study, not only the tribological performance but also the acoustic characteristics were investigated. To capture more realistic phenomena, a multiphase mixture cavitation model was used to analyze the cavitation behavior of the lubricant. The results of this study show a comparison of the tribological performance between each turbulence model while considering the presence of cavitation and thermal conditions on the thrust bearing. In addition, the performance of thrust bearings under laminar flow conditions without cavitation was compared with these results. By comparing the various models, the necessity of incorporating turbulence and cavitation-coupled effects was confirmed. The main results also show that in the case of the BSL and standard k-ω turbulence models.
29 January 2026 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Wear during the early running-in phase is a critical factor affecting the long-term performance of total hip prostheses, particularly in dual mobility systems that incorporate two articulating interfaces to enhance joint stability and reduce the risk of dislocation. This study presents a detailed computational investigation into the running-in wear behavior of hard-on-hard dual mobility total hip prostheses, focusing on three advanced bearing materials: cobalt chromium molybdenum (CoCrMo), aluminum oxide (Al 2 O 3 ), and polycrystalline diamond (PCD). Finite element analysis was employed, integrating Archard's wear model under gait cycle to simulate linear and volumetric wear across four key articulating regions: the acetabular cup, outer and inner surfaces of the acetabular liner, and the femoral head. Results demonstrated that PCD exhibited the lowest cumulative wear, with total linear and volumetric wear values reaching only 2.188 × 10 −4 mm and 1.170 × 10 −4 mm 3 respectively after 1 × 10 6 gait cycles, which is more than 95% lower than those of CoCrMo (1.170 × 10 −2 mm and 6.001 × 10 −3 mm 3 ). Al 2 O 3 displayed intermediate performance, reducing wear substantially compared to CoCrMo but not matching the exceptional resistance of PCD. The femoral head and the inner surface of the acetabular liner emerged as dominant contributors to early wear across all materials. These findings highlight the significant advantages of ultra-hard crystalline materials in minimizing tribological degradation and wear particle generation during the initial phase of implant function.