14 August 2018 in IEEE Journal of Solid-State Circuits
A 24-72-GS/s 8-b time-interleaved analog-to-digital converter (ADC) is presented which exceeds 39-dB SNDR at low input frequency and 30-dB SNDR at Nyquist. High SNDR at Nyquist is achieved by 16 parallel sampling switches driven by short clock pulses. Clock-pulse edges can be shifted digitally to reduce the impact of timing mismatch. A total of 64 asynchronous 8-b successive approximation (SAR) ADCs at low supply voltage convert sampled voltages. The SAR ADCs use a differential capacitive DAC, one comparator per decision, and include a reference voltage DAC and buffer. The ADC consumes 2.0 pJ/conversion at 48 GS/s and 3.3 pJ/conversion at 72 GS/s and is implemented in 14-nm CMOS FinFET on 0.15 mm².
10 November 2017 in IEEE Journal of Solid-State Circuits
A 64-Gb/s high-sensitivity non-return to zero receiver (RX) data-path is demonstrated in the 14-nm-bulk FinFET CMOS technology. To achieve high sensitivity, the RX incorporates a transimpedance amplifier whose gain and bandwidth are co-optimized with a 1-tap decision feedback equalization (DFE). The DFE, which operates at quarter-rate, features a look-ahead speculation to relax DFE timing to 4 unit-interval. The analog front end includes a transadmittance transimpedance inductorless variable gain amplifier, resulting in a low power and compact front end. The RX, wirebonded to a discrete GaAs photodiode, achieves an energy efficiency of 1.4 pJ/bit and −5-dBm optical modulation amplitude while recovering PRBS-7 data (bit-error-rate $<10^{-12}$ ) modulated by a VCSEL driver with a 2-tap feed forward equalization (FFE) (main + precursor) over 7 m of graded-index 50/125- $\mu \text{m}$ multimode fiber. The measured sensitivities at 56 and 32 Gb/s are −9- and −13-dBm optical modulation amplitude, respectively.
1 April 2018 in IEEE Journal of Solid-State Circuits
This paper presents a 32 Gb/s non-return-to-zero optical link using 850-nm vertical-cavity surface-emitting laser-based multi-mode optics with 14-nm bulk FinFET CMOS circuits. The target application is the integration of optics on to the first-level package, connecting high-speed optical I/O directly to an advanced CMOS host chip (e.g., processor and switch) to increase package I/O bandwidth density and lower overall system power and cost. The optical link is designed for maximum link margin to tolerate high optical losses created by low-cost optical packaging. The transmitter (TX) uses a three-tap, 1/2-unit-interval-spaced feed-forward equalizer to improve eye opening. The receiver (RX) uses a low-bandwidth, low-noise transimpedance amplifier and a speculative one-tap decision-feedback equalizer for high sensitivity. The TX and RX power efficiencies are 3.3 and 1.4 pJ/bit, respectively. The TX optical modulation amplitude (OMA) is 1.2 dBm, and the RX sensitivity is -11.7 dBm OMA at a bit error rate of 10 -12 with PRBS31 data, providing 12.9-dB link margin.
23 September 2019 in IEEE Journal of Solid-State Circuits
This article introduces a wireline receiver (RX) data-path employing discrete multi-tone (DMT) modulation for communicating over electrical links. The DMT RX incorporates a fully digital equalization data-path, with a synthesized and automatically placed and routed digital signal processor (DSP) following a 10-bit time-interleaved pipelined successive-approximation register analog-to-digital converter (TI-PISAR ADC). The prototype RX chip implemented in a 14-nm FinFET process demonstrates a lane data rate of 56 Gb/s dissipating 161 mW including the ADC and the DSP power. The energy efficiency of 1.2 pJ/b for the DSP and 2.9 pJ/b for the entire RX was achieved with the data-rate of 56 Gb/s for communicating over channels exhibiting up to 28-dB loss at 14 GHz with a bit-error-rate (BER) better than 2e-4.
29 August 2018 in IEEE Journal of Solid-State Circuits
A single-channel 12-bit SAR ADC achieving 250–340 MS/s and consuming 4.8–8.0 mW from 0.75 to 0.9 V is presented. At 300 MS/s, the ADC exhibits 61.6-dB peak SNDR and reaches 60.5-dB SNDR and 78.7-dB SFDR with 0.8- $\text{V}_{\text {pp, diff}}$ input amplitude at Nyquist. It consumes 7.0 mW from a single 0.85-V supply, where 3.7 mW is contributed by the reference buffer. The key element is a comparator with an inverter-based preamplifier to achieve low-noise performance with below 1- $\text{V}_{\text {pp, diff}}$ input amplitude. The common-mode (CM) sensitivity of the inverter is counteracted by an SAR-based CM regulation (CMREG). The regulation adjusts the sampled CM to the optimal CM for the maximum inverter gain using a second capacitive DAC. It adjusts the CM on a sample-by-sample basis and, thus, can correct time-varying CM. The implemented CMREG maintains SNDR above 60 dB for a differential input amplitude mismatch of up to 2 dB or a phase mismatch of up to 15°.
7 February 2018 in IEEE Journal of Solid-State Circuits
This paper presents an analysis on the loop dynamics of the digital clock and data recovery (CDR) circuits and the design details of a non-return to zero optical receiver (RX) in a 14-nm bulk CMOS finFET technology with high jitter tolerance (JTOL) performance, which is designed based on the analysis. The digital CDR logic is designed full custom in order to keep it running at a quarter rate clock of 15 GHz at 60-Gb/s sampling speed to minimize the CDR loop latency. The RX is characterized in a vertical cavity surface emitting laser-based link recovering a 7-bit pseudo-random bit sequence bit pattern at 60 Gb/s with a JTOL corner frequency of around 80 MHz while maintaining an energy efficiency of 1.9 pJ/bit.