21 November 2017 in IEEE Photonics Journal
Recently, visible light communication (VLC) based on LEDs has attracted much attention. In order to realize multiusers indoor VLC systems, a reasonable channel model considering random shadowing, which is first proposed to the best of our knowledge, is significant. Taking the nonquantitative obstructions with random movement into account, by introducing the Poisson process and the probability density function, we propose a weighting function and set up a channel model. The expressions of the received optical power, the horizontal illuminance and the impulse responses are given. The verification of the model's feasibility is presented through simulation. Moreover, based on the proposed channel model, the simulation analysis of the effect of random shadowing on communication performance is conducted, and the corresponding simulation optimization is also made.
6 November 2020 in Journal of Lightwave Technology
A novel vibration location method with nested pulses for distributed optical fiber vibration sensing system is proposed. The interferometric structure for vibration detection and location with nested pulse method is firstly designed. The continuous-wave light is modulated into a series of periodic nested pulses in the linear Sagnac interferometer. Each nested pulse contains a certain number of sub pulses to locate the position of vibration signal with the help of envelope derivation and threshold judgment. Experimental results show the location feasibility for vibration signals at different positions of long-range optical fiber, with the positioning error of 10m at 0.5 km and the positioning error of 26 m at 45.314 km. This method provides one solution for the location of actual vibration without the limit of frequency band.
29 December 2021 in IEEE Transactions on Electromagnetic Compatibility
Near-field mapping along the surface of an integrated circuit (IC) could reveal the radiated emission source inside by collecting the radiated electromagnetic field. In this article, the radiated emission source localization is first illustrated in a microstrip line model by analyzing the relationship between the physical position of the line and the hot spots of the electromagnetic field distribution along the line surface. The hot spot in each magnetic field distribution does not necessarily correspond to the physical position of the emission source due to the ground plane below. Furthermore, by analogy with the microstrip line model, the localization analysis is applied to a large-scale IC [field-programmable gate array (FPGA)] in a ball grid array package. For the demonstration, four operation states of the FPGA are designed with four general-purpose input–output (GPIO) pins outputting waveforms of different frequencies. By activating the sources in different operation states, it is found that the activated GPIO pins (as emission sources) can be located well by comprehensively analyzing the emission patterns of different components. The experimental results would be instructive to improve the understanding of IC near-field electromagnetic patterns and reasonable to localize an emission source.
1 April 2021 in Optics Communications
1 November 2021 in Ceramics International
13 February 2023 in IEEE Sensors Journal
WHEN electromagnetic field is emmited from integrated circuit (IC), electromagnetic pattern of the near field can be detected using electromagnetic probes. Electromagnetic pattern obtained in near field scanning over the surface of a device has attracted a lot of attentions in the electromagnetic interference diagnosis for EMI source localization [1], EMI diagnosis [2] and immunity test [3]. The mechanism for the generation of the electromagnetic pattern is wave propagation, which is helpful to further understand the properties of waves inside ICs. How to pinpoint what the culprits are that cause such propagation especially for a device with complicated metal interconnect inside is being studied. The source localization method [4] based on electromagnetic pattern are of general concern for integrated circuit (IC) design and the pattern clustering [5] could be helpful for the finding of the electromagnetic emission rule.