28 May 2025 in IEEE Photonics Journal
Specific demands of providing power to equipment in remote areas or hazardous environments, including populated areas, requiring high throughputs and ultra-low latency in beyond 5 G (B5G) mobile communications that are based on Radio over Fiber (RoF) have made Power over Fiber (PoF) attractive. This paper reviews a breakthrough of a long-distance hollow core fiber (HCF) fronthaul (up to 11.1 km) able to meet the requirements of B5G optical mobile networks, where the transmission medium is common to both 5 G NR and PoF signals. This work is placed in context and compared with results provided by other authors, showing the relevance of the outcomes and subsequent future possibilities. It also creates a discussion in which the performance of other fiber technologies may be compared, as new B5G fronthauls with special attention paid to transmission in a single fiber, avoiding noise transfer between high power laser PoF source and 5G-NR data that affects the signal quality. PoF energy delivery efficiencies are also analyzed, achieving up to 9.9 % efficiency (from launched optical power to electrical power on the load) for a 3.1 km HCF and 0.9 % for a 11.1 km HCF. The PoF signal is used to supply a Bluetooth Low-Energy load.
3 June 2024 in Optics Express
An integrated rigorous coupled-wave analysis (RCWA) algorithm is presented in this paper, which can simulate full vertical-cavity surface-emitting laser (VCSEL) and photonic crystal surface-emitting laser (PCSEL) structures. A classic RCWA can only analyze a structure when the light source is incident from the top, bottom, or both sides of the device. However, for VCSEL applications, the light source is generated in the middle and propagates in both directions. A bidirectional scattering matrix method and doubling algorithm are implemented in RCWA. The resonant wavelength and Q factor of a VCSEL can then be found in the output spectrum. The accuracy and execution speed are compared with those of the Lumerical finite-difference time-domain (FDTD) method for several VCSEL and PCSEL designs. The results show that the maximum discrepancy between RCWA and FDTD is less than 3 nm, and the difference in the far-field divergence angle is less than 0.5°. The speed of RCWA also outperforms FDTD simulation significantly.
22 April 2026 in Journal of Lightwave Technology
Power-over-fibre (PoF) can improve future network resilience by simultaneously delivering power and connectivity to remote equipment in situations where a supply based on copper cables is neither feasible nor appropriate. However, in standard silica fibres, the high optical powers have an impact on data signals due to nonlinearities, decreasing maximum data rates. Hollow-core fibre (HCF) as a transmission medium has a marked decrease in nonlinearity, and its applicability to PoF is studied here. Two experiments using $3.1$ and $1.2 \,\mathrm{k}\mathrm{m}$ lengths of HCF are conducted to investigate the benefits of this fibre as a medium to carry high-power optical signals alongside high-throughput data signals. The study of diverse wavelengths highlights the versatility of HCF for power transmission.
1 January 2026 in Journal of Lightwave Technology