This paper reports the design of a tactile sensor patch to cover large areas of robots and machines that interact with human beings. Many devices have been proposed to meet such a demand. These realizations are mostly custom-built or developed in the lab. The sensor of this paper is implemented with commercial force sensors. This has the benefit of a more foreseeable response of the sensor if its behavior is understood as the aggregation of readings from all the individual force sensors in the array. A few reported large area tactile sensors are also based on commercial sensors. However, the one in this paper is the first of this kind based on the use of polymeric commercial force sensing resistors (FSR) as unit elements of the array or tactels, which results in a robust sensor. The paper discusses design issues related to some necessary modifications of the force sensor, its assembly in an array, and the signal conditioning. The patch has 16 × 9 force sensors mounted on a flexible printed circuit board with a spatial resolution of 18.5 mm. The force range of a tactel is 6 N and its sensitivity is 0.6 V/N. The array is read at a rate of 78 frames per second. Finally, two simple application examples are also carried out with the sensor mounted on the forearm of a rescue robot that communicates with the sensor through a CAN bus.
9 July 2013 in IEEE Transactions on Industrial Electronics
Surmounting terrain elevations, such as terraces, is useful to increase the reach of mobile robots operating in disaster areas, construction sites, and natural environments. This paper proposes an autonomous climbing maneuver for tracked mobile manipulators with the help of the onboard arm. The solution includes a fast 3-D scan processing method to estimate a simple set of geometric features for the ascent: three lines that correspond to the low and high edges, and the maximum inclination axis. Furthermore, terraces are classified depending on whether they are reachable through a slope or an abrupt step. In the proposed maneuver, the arm is employed both for shifting the center of gravity of the robot and as an extra limb that can be pushed against the ground. Feedback during climbing can be obtained through an inertial measurement unit, joint absolute encoders, and pressure sensors. Experimental results are presented for terraces of both kinds on rough terrain with the hydraulic mobile manipulator Alacrane.
Search and Rescue operations in emergency response to natural or human catastrophes have the main objective of locating and rescuing potential victims as fast as possible, thus quick response and accurate actions are mandatory. While standard communications may be affected, a Wireless Sensor Network can be deployed to support the rescue team. This kind of network allows data acquisition close to events and enables persistence over time, among other advantages. However, enhancements must be made to improve the adaptation to this kind of scenario. This work presents two Hybrid Wireless Sensor Networks, based on ZigBee and LoRa, developed to address some of the challenges that Search and Rescue operations pose to the use of Wireless Sensor Networks, and tested in realistic scenarios in cooperation with first responders. Likewise, several software developments that increase the performance of the networks are described. Finally, the conclusions presented, and the lessons learnt are supported by a high amount of data, gathered in realistic exercises in cooperation with civilian and military first responders.
The urban population, worldwide, is growing exponentially and with it the demand for information on pollution levels, vehicle traffic, or available parking, giving rise to citizens connected to their environment. This article presents an experimental long range (LoRa) and low power consumption network, with a combination of static and mobile wireless sensors (hybrid architecture) to tune and validate concentrator placement, to obtain a large coverage in an urban environment. A mobile node has been used, carrying a gateway and various sensors. The Activation By Personalization (ABP) mode has been used, justified for urban applications requiring multicasting. This allows to compare the coverage of each static gateway, being able to make practical decisions about its location. With this methodology, it has been possible to provide service to the city of Malaga, through a single concentrator node. The information acquired is synchronized in an external database, to monitor the data in real time, being able to geolocate the dataframes through web mapping services. This work presents the development and implementation of a hybrid wireless sensor network of long range and low power, configured and tuned to achieve efficient performance in a mid-size city, and tested in experiments in a real urban environment.
The paper presents ALACRANE, a new mobile robot assistant for exploration and rescue missions with dexterous load manipulation capability. ALACRANE consists of a tracked vehicle with a 4-DOF articulated arm, whose end-effector is an independent pair of 3-DOF manipulators (LR-Arms) plus a common rotation on the main arm wrist. All actuators are hydraulic in order to provide a high power-to-size ratio for both traction and manipulation. The system is equipped with CCD and IR cameras and a 3D-laser scanner for victim detection and environment perception. Three operation modes have been envisaged for the robot: navigation, main arm positioning, and LR-Arms operation. The control architecture provides different levels of autonomy and tele-operation for each mode. Preliminary tests with the actual system are presented.
31 January 2012 in IEEE/ASME Transactions on Mechatronics
This paper analyzes the effect of towing a single-axle trailer on static tip-over stability for field mobile robots on slopes. For this purpose, this study defines altered supporting polygons (ASP) for both tractor and trailer. These ASPs are based on a force-torque static equilibrium analysis that reshapes the corresponding ground contact supporting polygons. In this way, it is possible to estimate tip-over stability for each unit separately by projecting its center of gravity onto its ASP, even in the case that both bodies have different inclinations. Online implementation issues and simulation results are discussed. Moreover, a case study is presented for the Alacrane mobile manipulator, which carries a trailer for power generation.