21 April 2021 in IEEE Internet of Things Journal
Wearable sensors demand flexible and concealable devices that can be seamlessly integrated with apparels and clothes. E-textile sensors and devices, built from specially functionalized fibers and yarns and constructed with embroidery and woven processes, provide an ideal solution for different wearable applications. In this article, we propose a textile-based, embroidered passive strain and displacement sensor functioned as a UHF RFID antenna that can be aesthetically integrated with garment fabrics. The antenna structure consists of a dipole arm and a coupling loop mounted with an RFID chip. The displacement between the loop and dipole arm will alter the impedance of the antenna and consequently modulate the backscattered signals from the RFID chip to the reader. The sensor is passive, i.e., no battery is needed on the sensor and the sensing information can be wirelessly retrieved by the reader from a few meters away. The structure is sensitive to strains and displacement caused by body movement. Our experiments demonstrate different applications for this sensor, i.e., when the sensor is embroidered on different locations on human body, such as breast, knees, and elbows, it can be used as a respiration monitor, gesture indicator, etc. to conveniently track and log various forms of body movements.
20 December 2019 in IEEE Journal of Radio Frequency Identification
Embroidering antennas and coils directly onto fabrics is the ideal solution for RFID (UHF or HF) deployment in apparel and garment industry. However, RFID tags embroidered with conductive yarns have several limitations in their design and performance. 1) antennas cannot utilize geometries with higher resolution, 2) yarns have higher resistivity than metallic materials, and 3) the parasitic capacitance will be introduced inside the micro-structures as well as between the threads. These issues all limit the performance of embroidered RFID tags. In this paper, we explore quantitatively the limitations of embroidered antenna designs, and propose the guideline to design embroidery-friendly RFID antennas to achieve a satisfactory performance. Several UHF RFID tags with embroidered antennas and coils are prototyped, and their performance is comparable to traditional metallic antennas based on polyethylene terephthalate (PET) substrate.
20 May 2022 in ACS Applied Materials & Interfaces
22 March 2022 in IEEE Sensors Journal
RFID tags not only can be used as identification devices, with antenna sensing techniques, they can also be used as low-cost and battery-less sensors. However, RFID antenna sensing relies on the impedance and/or gain modulation of the tag’s antenna, and extracts the sensing information through the RSSI variation of the backscattered signals. The sensing information is prone to the interferences and noises in the reader-tag communication channel, as well as the distance variations if the sensors are in constant motion. In this paper, we propose a sensor structure that is constructed from adjacently placed double tags to address these issues. The EM properties of the antennas of the double tags behave differently (or even oppositely) under the same sensing variation; therefore, the differential backscattered signals of the dual-tag sensor can eliminate the common-mode interferences while preserving the sensing information. We have constructed one curvature sensor and one deformation sensor with embroidered antennas (using conductive yarns) and all-fabric materials, and sewn the sensors on apparels to demonstrate their use in smart clothing applications. The experiments show that even when the human body is in constant motion, the curvature sensor sewn on the knee area can effectively monitor human’s body gesture, while the deformation sensor sewn on the chest area can precisely detect the respiration activities.
15 May 2023 in Nature Communications
Conductive yarns have emerged as a viable alternative to metallic wires in e-Textile devices, such as antennas, inductors, interconnects, and more, which are integral components of smart clothing applications. But the parasitic capacitance induced by their micro-structure has not been fully understood. This capacitance greatly affects device performance in high-frequency applications. We propose a lump-sum and turn-to-turn model of an air-core helical inductor constructed from conductive yarns, and systematically analyze and quantify the parasitic elements of conductive yarns. Using three commercial conductive yarns as examples, we compare the frequency response of copper-based and yarn-based inductors with identical structures to extract the parasitic capacitance. Our measurements show that the unit-length parasitic capacitance of commercial conductive yarns ranges from 1 fF/cm to 3 fF/cm, depending on the yarn’s microstructure. These measurements offer significant quantitative estimation of conductive yarn parasitic elements and provide valuable design and characterization guidelines for e-Textile devices.
1 May 2021 in Solar Energy