27 February 2020 in ACS Applied Materials & Interfaces
30 July 2019 in Advanced Intelligent Systems
E‐Textiles have gained increasing momentum in wearable electronics recently. Conductive‐yarn‐based embroidered devices, with the advantages of being soft, deformable, breathable, and protective for the skin, play an important role in replacing many metallic counterparts. However, embroidered devices face many new challenges in their design methodology and fabrication processes, such as high resistivity and low Q value of the conductive yarns, as well as deformation of device geometries during wearing. Herein, a strain‐free, deformation‐resilient embroidery process for near field communication (NFC) coil antennas is introduced. Coil geometry can endure extreme deformation by stretching with up to 50% elongation, bending with curvature as small as 16 mm in radius, and can still maintain a relatively small variation in its inductance, resonant frequency, Q value, as well as its energy‐harvesting capabilities. The embroidered coil antenna is used in an NFC‐based battery‐free body sensor system. Experiments demonstrate that the system can maintain a stable performance (voltage supply, temperature sensing, and reading range) under various deformation conditions.
10 July 2020 in IEEE Sensors Journal
This paper proposes an accurate model for yarn-based embroidered coil antenna used in Near Field Communication (NFC) applications. Traditionally, the inductance of a coil-shaped antenna is calculated using the Wheeler's equation, while accurate enough for metallic coil geometries, the results from Wheeler's equation have more than 20% errors when being applied to yarn-based embroidered antennas. We have discovered that this discrepancy is related to the parasitic capacitance, which is caused by the subtle gaps along twisted fibers. Experiments demonstrate that the parasitic capacitance has significant impact on the overall performances of the coil antenna. In this paper, an equivalent model for yarn-based coils is proposed to take into account of the parasitic capacitance and antenna geometrical characteristics. Compared with traditional Wheeler's equation, the inductance calculated from this proposed model is within 5% from the measured value. Additionally, the electromagnetic performance of the embroidered coil is resilient to mechanical deformation. When being used as a coupling antenna, it can harvest energy and power-up the NFC-based platform for body-area-network applications.
20 May 2022 in ACS Applied Materials & Interfaces