Abdullah Haskou

Abdullah Haskou

Auto-generated profile, based on publicly available information

Abdullah Haskou

IETR UMR CNRS 6164- Université de Rennes 1, Rennes, France

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 October 2015 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
AHAbdullah Haskou
Abdullah Haskou
ASAla Sharaiha
Ala Sharaiha
SCSylvain Collardey
Sylvain Collardey
This paper presents an approach for designing parasitic loaded superdirective antenna arrays. The array current excitation coefficients calculated based on Yaghjian method are used with the array input impedance matrix to deduce the required loads for transforming the array to a parasitic one. The proposed method's practical limitations are studied via a parametric analysis on dipole-based arrays. It is also applied to design two- and three-element arrays based on an electrically small antenna (ESA). Simulation results show a very good agreement between the fully driven array's total directivity radiation pattern and the parasitic (loaded) array's one. Simulation results also show that the array end-fire total directivity is maximal at the design frequency. Measured results are in a very good agreement with the simulated ones.

30 December 2024 in IEEE Communications Letters
Verified
Journal Article
Closed access
HKHamidreza Khaleghi
Hamidreza Khaleghi
AHAbdullah Haskou
Abdullah Haskou
6th-Generation (6G) networks seek improved coverage and efficiency, with Reconfigurable Intelligent Surfaces (RISs) offering a way to create adaptable radio environments. Achieving optimal performance in RIS-assisted systems, especially with multiple antennas, depends on precise channel estimation. This paper introduces enhanced methods for separate channel estimation that lower pilot overhead and improve efficiency by using deterministic channel models and optimal RIS configurations, addressing challenges in large-scale RIS deployments for next-generation networks.

27 June 2016 in Microwave and Optical Technology Letters
Verified
Journal Article
Closed access
PDF file
MHMohamad Hammoud
Mohamad Hammoud
AHAbdullah Haskou
Abdullah Haskou
ASAla Sharaiha
Ala Sharaiha
SCSylvain Collardey
Sylvain Collardey

5 December 2016 in Comptes Rendus. Physique
Verified
Journal Article
Open access
AHAbdullah Haskou
Abdullah Haskou
ASAla Sharaiha
Ala Sharaiha
SCSylvain Collardey
Sylvain Collardey
Some applications as Wireless Power Transfer (WPT) require compact and directive antennas. However, Electrically Small Antennas (ESAs) have low efficiencies and quasi-isotropic radiation patterns. Superdirective ESA arrays can be an interesting solution to cope with both constraints (the compactness and the directivity). In this paper, the theoretical and practical limits of superdirective antennas will be presented. These limits can be summarized by the directivity sensitivity toward the excitation coefficients changes and the radiation efficiency decrement as the inter-element decreases. The need for negative resistances is also a practical limit for transforming these arrays into parasitic ones. The necessary trade-offs between the antenna total dimensions (the number of elements and the inter-element distance) and the attainable directivity and efficiency are also analyzed throughout this paper.

1 November 2014
Verified
Conference Paper
Closed access
AHAbdullah Haskou
Abdullah Haskou
ASAla Sharaiha
Ala Sharaiha
SCSylvain Collardey
Sylvain Collardey
MPMelusine Pigeon
Melusine Pigeon
KMKouroch Mahdjoubi
Kouroch Mahdjoubi
This paper presents a design methodology for electrically small superdirective antenna arrays. To calculate the required current excitation coefficients the radiated electrical fields obtained from an electromagnetic simulator are integrated in Uzkov equations. The obtained parameters are, then, optimized and used for calculating the power excitation coefficients. The proposed method is deployed for designing a two-element array for an inter-element separating distance varying from 0.05λ to 0.5λ. Simulation results show that the proposed method accurately estimates the required excitation coefficients and the method is validated.

26 May 2025 in IEEE Communications Standards Magazine
Verified
Journal Article
Closed access
SMSaeedeh Moloudi
Saeedeh Moloudi
TKTalha Ahmed Khan
Talha Ahmed Khan
GMGiuseppe Moschetti
Giuseppe Moschetti
RNRevathy Narayanan
Revathy Narayanan
HKHamza Khan
Hamza Khan
MAMehrnaz Afshang
Mehrnaz Afshang
Zero-energy devices, also known as Ambient power-enabled Internet of Things (A-IoT) devices, rely on harvesting ambient energy to operate. These self-sustainable devices do not need manual battery recharging or replacement, making them easy to maintain. A-IoT can address new Internet of Things (IoT) use cases within the cellular ecosystem which the existing cellular IoT technologies were not designed for. To address these use cases, a technical study was conducted by the Third Generation Partnership Project (3GPP) in Release 19 to identify the challenges and develop solutions for a new cellular radio access technology for A-IoT devices that can be deployed in 5G New Radio (NR) spectrum using or coexisting with existing NR network infrastructure. The key challenges for cellular A-IoT devices include low power budget, intermittent energy availability, limited synchronization and computational capabilities due to simplified hardware, and coexistence with NR. In this paper, the 3GPP standardization work on A-IoT is reviewed, with a focus on the physical layer aspects considered in the aforementioned Release 19 study. First, the nomenclature for A-IoT device types, architectures, and deployment scenarios is summarized. This is complemented by a description of the A-IoT physical layer design for downlink and uplink, including aspects such as physical channels, waveform, modulation, coding, preamble, and multiple access. The issues related to coexistence of A-IoT and NR are also outlined. A brief discussion on the upcoming 3GPP A-IoT standardization work concludes the paper.