28 March 2018 in IEEE Access
In this paper, authors present their work on field-programmable gate array (FPGA) hardware implementation of proposed direction of arrival estimation algorithms employing LU factorization. Both L and U matrices were considered in computing the angle estimates. Hardware implementation was done on a Virtex-5 FPGA and its experimental verification was performed using National Instruments PXI platform which provides hardware modules for data acquisition, RF down-conversion, digitization, etc. A uniform linear array consisting of four antenna elements was deployed at the receiver. LabVIEW FPGA modules with high throughput math functions were used for implementing the proposed algorithms. MATLAB simulations of the proposed algorithms were also performed to validate the efficacy of the proposed algorithms prior to hardware implementation of the same. Both MATLAB simulation and experimental verification establish the superiority of the proposed methods over existing methods reported in the literature, such as QR decomposition-based implementations. FPGA compilation results report low resource usage and faster computation time compared with the QR-based hardware implementation. Performance comparison in terms of estimation accuracy, percentage resource utilization, and processing time is also presented for different data and matrix sizes.
2 July 2019 in IEEE Access
Hardware implementation of proposed direction of arrival (DOA) estimation algorithms based on Cholesky and LDL decomposition is presented in this paper. The proposed algorithms are implemented for execution on an FPGA (field programmable gate array) as well as a PC (running LabVIEW) for multiple non-coherent sources located in the far-field region of a uniform linear array (ULA). Prototype testbeds built using National Instruments (NI) Universal Software Radio Peripheral (USRP) software defined radio (SDR) platform and Xilinx Virtex-5 FPGA are originally constructed for the experimental validation of the proposed algorithms. Results from LabVIEW simulations and real-time hardware experiments demonstrate the effectiveness of the proposed algorithms. Specifically, the implementation of proposed algorithms on a Xilinx Virtex-5 FPGA using LabVIEW software clarifies their efficiency in terms of computation time and resource utilization, which make them suitable for real-time practical applications. Moreover, performance comparison with QR decomposition-based DOA algorithms as well as similar FPGA-based implementations reported in the literature is conducted in terms of estimation accuracy, computation speed, and FPGA resources consumed.
29 December 2023 in IEEE Access
The direction of arrival (DOA) estimation of multiple radio frequency (RF) coherent signals using conventional algorithms such as Multiple Signal Classification (MUSIC), Estimation of the Signal Parameters via the Rotational Invariance Technique (ESPRIT), and their variants is computationally complex and usually requires a large number of data snapshots for accurate estimation. As the number of antenna elements grows, particularly in massive MIMO systems, the complexity of real-time DOA estimation algorithms significantly rises, placing higher demands on computational power and memory resources. In this paper, we present an efficient approach that operates effectively with just a single snapshot for DOA estimation of multiple coherent and non-coherent signals. The proposed method has the following advantages over existing methods: 1) constructs a Toeplitz structure data matrix from a single data snapshot, 2) applies forward-backward averaging operation to the data matrix instead of the covariance matrix constructed using hundreds of snapshots, 3) resolves the differences in the noise elements of the data matrix, preserving the conjugate symmetry property of the Toeplitz matrix, 4) converts the complex Toeplitz data matrix to a real-valued matrix in an efficient way without unitary transformations, and 5) employs QR decomposition to extract the signal and noise subspaces, eliminating the need for computationally complex eigenvalue (EVD) or singular value decomposition (SVD). Finally, we establish the effectiveness of our proposed method through both MATLAB simulations and real-time experiments. Compared to existing methods like Unitary root-MUSIC, the proposed approach demonstrates significantly reduced complexity and faster estimation times.
16 December 2025 in IEEE Access
Direction of Arrival (DOA) estimation of highly correlated or coherent sources remains a challenging problem, particularly for subspace-based methods such as MUSIC and Root-MUSIC, which require spatial smoothing or eigenvalue decomposition. This work introduces a decomposition-free DOA estimation algorithm that exploits the inherent Toeplitz structure of uniform linear arrays (ULAs). The method constructs a structured Toeplitz matrix directly from the received data vector, forms a real, symmetric compound matrix to enable real-valued processing, and extracts structured sub-blocks without matrix decomposition. A polynomial matrix is then generated, and the DOAs are obtained by solving its roots, thereby bypassing covariance decomposition entirely. This design reduces computational burden, improves numerical stability, and inherently accommodates coherent sources without the need for spatial smoothing. Computational complexity analysis shows significant savings compared to subspace methods, while MATLAB simulations across various SNR, snapshot, and array size conditions validate estimation accuracy. Furthermore, a hardware realization on the NI PXIe-7993 FPGA platform demonstrates that the decomposition-free structure requires minimal hardware resources and execution cycles, making the algorithm highly suitable for real-time embedded applications.
14 September 2018 in Radioengineering