Mithlesh Kumar

Mithlesh Kumar

Auto-generated profile, based on publicly available information

Mithlesh Kumar

Brookhaven National Laboratory, Upton, NY, USA

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 February 2021 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
MKMithlesh Kumar
Mithlesh Kumar
RGRoberto Guarino
Roberto Guarino
KSKamil Sedlak
Kamil Sedlak
XSXabier Sarasola
Xabier Sarasola
PBPierluigi Bruzzone
Pierluigi Bruzzone
The EUROfusion DEMO machine is at its pre-conceptual stage. The design of the magnet system for this machine is being developed in collaboration with several European research centers. The Poloidal Field (PF) coils proposed by the Swiss Plasma Center (SPC) use a multiple-in-hand Pancake winding technique. A design based on updated plasma scenarios (2018) was recently proposed. The Winding Pack (WP) aspect ratio was kept close to one, similar to the baseline design in the EUROfusion 2018 DEMO baseline document. In this publication, we study the effects of changing WP aspect ratio. A vertically elongated WP cross-section is beneficial in the reduction of the peak magnetic field at WP cross-section, the machine radial extent, and the hydraulic lengths. However, it increases the bending stress on the WP. An updated PF design is presented. The dimensioning and allocation of materials is based on 3-dimensional electromagnetic calculations. Mechanical performance is evaluated against both dynamic fatigue stress and static stresses. The static stresses are evaluated through 3-dimensional finite element simulations to take into account also the ripple effect of TF coils and increase in bending stresses due to the elongation of the WP cross-section. The thermal-hydraulic analysis verifies a temperature margin of 1.5 K and confirms sufficient coolant flow for the prescribed pressure drop. The quench analysis determines the hot-spot temperatures during various quench scenarios.

28 January 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
MKMithlesh Kumar
Mithlesh Kumar
KSKamil Sedlak
Kamil Sedlak
XSXabier Sarasola
Xabier Sarasola
PBPierluigi Bruzzone
Pierluigi Bruzzone
The dimensioning of Winding Packs and allocation of materials in DEMO PF coils is proposed based on the requirements defined by the EUROfusion 2018 DEMO baseline. The coils are pancake-wound and use two types of forced flow cable-in-conduit conduc-tors. The conductor which uses NbTi has a high void fraction but has no separated low-impedance cooling channel. On the other hand, the conductor made using Nb3Sn has a separated low-impedance cooling channel and therefore low void fraction in the remaining cable space. Both the conductors have a rectangular cross-section. The design addresses the dimensioning of the Winding Pack (WP) based on the electromagnetic field calcula-tions and stress analysis. The amount of superconductor, copper, and cable void fraction in the conductor are determined by the coil current, magnetic field and assumed temperature margin. The amount of structural material in the conductor jacket de-pends mainly on the fatigue stress corresponding to the pulsed operation of these coils. For PF1 and PF6 coils, the comparison of NbTi and Nb3Sn design options suggest a more efficient alloca-tion of structural and superconducting material in the latter case. The WP dimensions do not significantly depend on the winding technique (pancake vs layer winding).

26 March 2021 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
PBPierluigi Bruzzone
Pierluigi Bruzzone
KSKamil Sedlak
Kamil Sedlak
BSBoris Stepanov
Boris Stepanov
MKMithlesh Kumar
Mithlesh Kumar
VDVincenzo D'Auria
Vincenzo D'Auria
A Nb 3 Sn based, React&Wind flat cable, named RW2, was developed in the past three years at the Swiss Plasma Center in the scope of the EUROfusion conceptual studies for DEMO. The test results presented earlier proved an excellent DC performance, but large eddy currents loss in the segregated copper. Here we present the results of a prototype conductor assembled in late 2019 from an older section of RW2 cable and a novel stabilizer, made by two Rutherford cables of thick, high RRR copper wires extruded with a cladding of high resistivity CuNi alloy. The results of the test in SULTAN of the new prototype are discussed in terms of DC and AC loss performance. The AC loss is measured in both orientations, for sinusoidal and trapezoidal field pulses. The test is carried out at both 4.5 K and 20 K operating temperature, allowing separating the contribution of the eddy currents in the segregated copper from the other sources of ac loss, hysteresis and coupling loss. The goal of reducing the eddy currents to a level comparable to the coupling current loss is achieved with the cabled stabilizer, which is now retained as baseline for the React&Wind DEMO conductor.

10 January 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
MKMithlesh Kumar
Mithlesh Kumar
KSKamil Sedlak
Kamil Sedlak
XSXabier Sarasola
Xabier Sarasola
PBPierluigi Bruzzone
Pierluigi Bruzzone
ACAntonio della Corte
Antonio della Corte
VCValentina Corato
Valentina Corato
The PF coils are designed based on the requirements defined by the EUROfusion 2015 DEMO baseline. The conductors are forced flow, NbTi cable-in-conduit. The design addresses the dimensioning of the winding pack, the electromagnetic field calculation and mechanical load. The cross sections of the cable, i.e. superconductor, copper and helium are allocated to fulfil the design criteria for the temperature margin and pressure drop in operation. The conductors have rectangular cross section and are layer wound, multiple-in-hand, to minimize the hydraulic length (1 single turn can be as long as 100 m). The orientation of the wide side parallel to the main field component minimizes the AC loss. The larger radius compared to ITER PF coils calls for larger electromagnetic load and hence much larger cross section for the structural support, which must be added on top of the conductor conduit to avoid unmanageable thick conduit walls. For PF1 and PF6 coils, a design option with Nb3Sn conductor may need to be considered due to the effective magnetic field in excess of 6.2 T.

2 March 2021 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
LMLuigi Muzzi
Luigi Muzzi
LALuigi Affinito
Luigi Affinito
SCSandro Chiarelli
Sandro Chiarelli
VCValentina Corato
Valentina Corato
ACAntonio della Corte
Antonio della Corte
BSBoris Stepanov
Boris Stepanov
In the frame of the conceptual design studies for the Toroidal Field (TF) coils of DEMO, a solution based on a layer-wound magnet, rectangular-shaped Cable-in-Conduit conductors and W&R manufacturing approach, is being developed. The feasibility and performance of a large-size Nb 3 Sn conductor operating at about 82 kA in a 13 T field has been proven in the past. Another key technology to be demonstrated for a layer-wound TF coil, is that of a joint between two different conductor grades, to be possibly manufactured in-line during winding. The proposed joint solution would provide the minimum room occupancy, with the joint embedded within the winding pack volume. A joint between two low-field conductor grades, i.e., constituted of a small number of superconducting strands and a high number of stabilization copper wires, has been designed and manufactured. The two conductor lengths are characterized by a different number of superconducting wires and different outer dimensions. A joint sample has been assembled and instrumented, in the configuration allowing testing at the SULTAN facility of the Swiss Plasma Center. Both DC and AC performance of the joint has been characterized at the DEMO TF operating conditions. The present paper reports the main manufacturing steps for the joint and its main test results. The implications on the performance and design approach of the TF coil are also discussed, based on the outcome of such tests.

26 February 2024 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
DAD. M. Araujo
D. M. Araujo
BAB. Auchmann
B. Auchmann
ABA. Brem
A. Brem
MDM. Daly
M. Daly
CHC. Hug
C. Hug
AMA. Milanese
A. Milanese
In the context of high-energy physics, the use of Nb 3 Sn superconducting magnets as a cost-effective and reliable technology depends on improvements in the following areas: long development and manufacturing cycles, conductor degradation after thermal cycling, long training, as well as a demonstration in accelerator magnets with a beam aperture of the full potential of modern Nb 3 Sn conductors. In short, performance, robustness, and cost are the three issues to be addressed. The Magnet Development project (MagDev) of the Swiss Accelerator Research and Technology initiative (CHART) at the Paul Scherrer Institute (PSI) aims to contribute to the solutions to each of these issues, re-thinking the manufacturing and design process. In our program, every innovation is to be validated by means of a panoply of fast-turnaround tools: from non-powered and powered samples and coils, tested under background field, to low-field subscale magnets and high field short prototypes. This work presents one element in this panoply of R&D vehicles: a stress-managed Nb 3 Sn coil called BigBOX, impregnated with paraffin wax, and tested, through a collaboration with the Magnet Development Program of the United States (US-MDP), in the background field of Brookhaven National Laboratory (BNL)’s common coils dipole DCC17.