In this paper, we theoretically analyze the wavelength temperature stability of multifunctional integrated optical chips (MIOCs) applied on fiber optic gyroscopes (FOGs). This study is critical for improving the temperature stability of the FOG scale factor, which is a significant parameter used to evaluate the dynamic characteristics of FOGs. Analytical and multiphysics simulations uncover two significant new predictions. First, changes in environmental temperature can lead to misalignment of the coupling structure between the chip and fiber, which is the main reason for the deterioration of the MIOC wavelength temperature stability. Second, misalignment caused by temperature changes is related to the initial alignment parameters of the coupling structure. Therefore, we can effectively improve the wavelength temperature stability of an MIOC by correctly choosing the initial alignment state of the coupling structure. Space coupling experiments are also presented to verify these predictions, and the experimental and simulation results are in good agreement.
4 April 2024 in IEEE Transactions on Components, Packaging and Manufacturing Technology
This paper demonstrated the design and fabrication of a TR microsystem in Ka-band based on silicon 3D Heterogeneous-integration. To achieve this microsystem, we proposed a novel silicon interposer with bonded metal on RDL, which solved the compatibility problem involved in eutectic bond and wirebond processes. A brand new temperature-gradient-free stacking method achieved by printing conductive adhesive bonding technology is also presented, which reduces the stacking temperature while introduces no extra temperature-gradient. Based on these technologies, a 4-channels T/R microsystem with 6-bits phase for both T/R channels, smaller than 9.5mm×9.8mm×2mm, lighter than 0.3g and working at 33-35GHz is fabricated, whose receive noise figure is lower than 5.7dB and the maximum output power exceeds 25dBm.
13 September 2016 in IEEE Photonics Technology Letters
We propose a design for a hollow core photonic bandgap fiber (HC-PBF), with a quasi-elliptical core region stacked by modified periodic capillary tubes. This type of HC-PBF possesses birefringence > 4.6×10 -4 in the wavelength range of 1.46-1.59 μm, and a low confinement loss of <; 0.02 dB/m, while maintaining single-mode operation.
This article demonstrated the design and fabrication of a compact software-defined RF (SDR) microsystem based on heterogeneous integrated (HI) RF transceiver and baseband chiplets. To achieve this microsystem, we propose a silicon substrate process with through silicon vias (TSVs) and multiredistribution layers (RDLs) on both surfaces. Three RDLs with $10~\mu $ m linewidth and $10~\mu $ m line gap are achieved with silicon oxide dielectrics, which can support complex and high-density pin interconnections among chiplets. And by introducing a silicon-embedded metal layer and thick polyimide (PI) dielectric layer between thick metal layers, four RDLs with large metal cross sections and high overcurrent capacities are realized to support low loss RF transmission lines (TLs) and high DC power redistribution. Based on the HI process, a $30\times 30\times 2$ mm compact SDR microsystem is realized by integrating two dual-RF-channel transceiver dies and one field-programmable gate array (FPGA) die, which approaches four independent 100 MHz–2.7 GHz broadband RF channels. The transmitter shows measured maximum gain of 3.3dB and output 1 dB compression (OP1dB) of 6.7dBm at 1.5GHz. The receiver shows measured maximum gain of 53.4dB and noise figure (NF) of 5.1dB.