Jeremy P. Bos

Jeremy P. Bos

Auto-generated profile, based on publicly available information

Jeremy P. Bos

Department of Electrical and Computer Engineering, Michigan Technological University, Houghton, MI, USA

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2012 in Optical Engineering
Verified
Journal Article
Closed access
PDF file
JBJeremy P. Bos
Jeremy P. Bos
MRMichael C. Roggemann
Michael C. Roggemann
The presence of turbulence over horizontal imaging paths severely reduces the resolution available to imaging systems and introduces anisoplanatic distortions in the image frame. A variety of image processing techniques are being developed which can mitigate these effects, and sequences of high-fidelity images created via simulation are useful in their development. In this paper, we describe a simplification of the split-step wave propagation method that employs a series of uniformly spaced phase screens to accurately simulate turbulence effects on imaging over horizontal paths. Employing this method, a series of 1000 image frames were generated for each of three turbulence conditions. The mean squared error in intensity per pixel is also evaluated for each frame in comparison to a diffraction-limited reference. Examination of the per-frame intensity error statistics indicate these errors are log-normally distributed about a mean value that increases approximately linearly with turbulence strength.

14 October 2022 in Optical Engineering
Verified
Journal Article
Closed access
PDF file
Nathir RawashdehNathir Rawashdeh
Nathir Rawashdeh
JBJeremy P. Bos
Jeremy P. Bos
NANader J. Abu-Alrub
Nader J. Abu-Alrub
Autonomous vehicles rely on perceiving the road environment through a perception pipeline fed by a variety of sensor modalities, including camera, lidar, radar, infrared, gated camera, and ultrasonic. The vehicle computer must perform sensor fusion reliably in various sensor signals degrading environments, which can be performed parametrically or using machine learning. We study sensor fusion of a forward-facing camera and a lidar sensor using convolutional neural networks (CNNs), for drivable area detection in winter driving, where the roads are partially covered with snow, tire tracks obscuring lane markers. Seven fusion models are developed and evaluated for their ability to classify pixels into two classes: drivable and nondrivable. A total of seven models are designed and tested, including camera only, lidar only, early fusion, (three types of) intermediate fusion, and late fusion. The models have accuracies between 84% and 89%, with runtimes between 23 and 61 ms. To select the best model from this group, we introduce a unique metric, named normalized accuracy runtime (NAR) score. A network in a group has a higher NAR score, the more accurate it is, and the shorter its runtime is. The models are evaluated on a winter driving DENSE dataset. Camera and lidar fog noise are synthesized to examine model robustness.

1 April 2022 in Optical Engineering
Verified
Journal Article
Open access
PDF file
JBJeffrey R. Beck
Jeffrey R. Beck
JBJeremy P. Bos
Jeremy P. Bos
TBTerry J. Brennan
Terry J. Brennan
MSMark F. Spencer
Mark F. Spencer
Laser-beam propagation through deep turbulence results in constructive and destructive interference known as scintillation. The Rytov number (aka log-amplitude variance) gives a gauge for the amount of scintillation. In turn, when the Rytov number increases above 0.1, the scintillation becomes severe and total-destructive interference gives rise to branch points in the pupil-phase function. These so-called branch points manifest where the real and imaginary parts of the complex-optical field equate to zero.

3 January 2023 in Optical Engineering
Verified
Journal Article
Open access
PDF file
AKAkhil M. Kurup
Akhil M. Kurup
JBJeremy P. Bos
Jeremy P. Bos
Autonomous vehicles (AV) and robo-taxis have been slowly making their way into our daily lives. Tasks, such as lane-keeping, parking assist, and automated lane changes, are some of the features available in modern production vehicles as part of advanced driver assistance system (ADAS) feature packages. Inclement winter weather, such as heavy rain and snow reduces visibility and free-flowing traffic speeds.1 Populated North American cities, such as Detroit, Chicago, Minneapolis, and many others, can receive over 1 inch (2.5 cm) of snow per hour, severely affecting the transportation infrastructure. The AVs must be capable of operating in such conditions to ensure universal adaptation. Current technologies, however, lack the capability to operate effectively in adverse winter conditions and one of the leading reasons is the lack of available winter weather datasets. Providing large and varied datasets for training deep learning can be challenging. In the AV space, the problem is sometimes solved by hiring human drivers to drive automobiles in varied traffic scenarios and locations. A popular approach is to use simulation tools in different scenarios.2,3 However, it has been recognized that the performance of deep learning approaches is limited by the availability of “corner cases” in the training set. In short, when these algorithms are exposed to scenarios not present in their training data they can fail in sometimes unexpected ways.4,5

1 April 2014 in Optical Engineering
Verified
Journal Article
Open access
PDF file
GAGlen E. Archer
Glen E. Archer
JBJeremy P. Bos
Jeremy P. Bos
MRMichael C. Roggemann
Michael C. Roggemann
The potential benefits of real-time, or near-real-time, image processing hardware to correct for turbulence-induced image defects for long-range surveillance and weapons targeting are sufficient to motivate significant resource commitment to their development. Quantitative comparisons between potential candidates are necessary to decide on a preferred processing algorithm. We begin by comparing the mean-square-error (MSE) performance of speckle imaging (SI) methods and multiframe blind deconvolution (MFBD), applied to long-path horizontal imaging of a static scene under anisoplanatic seeing conditions. Both methods are used to reconstruct a scene from three sets of 1000 simulated images featuring low, moderate, and severe turbulence-induced aberrations. The comparison shows that SI techniques can reduce the MSE up to 47%, using 15 input frames under daytime conditions. The MFBD method provides up to 40% improvement in MSE under the same conditions. The performance comparison is repeated under three diminishing light conditions, 30, 15, 8 photons per pixel on average, where improvements of up to 39% can be achieved using SI methods with 25 input frames, and up to 38% for the MFBD method using 150 input frames. The MFBD estimator is applied to three sets of field data and representative results presented. Finally, the performance of a hybrid bispectrum-MFBD estimator that uses a rapid bispectrum estimate as the starting point for the MFBD image reconstruction algorithm is examined.

1 June 2018 in Journal of Magnesium and Alloys
Verified
Journal Article
Open access
GWGerry Wang
Gerry Wang
JBJeremy Bos
Jeremy Bos
With tremendous weight saving potential, magnesium alloy high pressure die casting components have been widely used for automotive applications. Magnesium fastening technology is thus becoming increasingly important to design engineers. Joining as-cast holes of magnesium high pressure die casting components with thread forming fasteners provides significant advantages for the assembly process, overall cost benefit and joint integrity. This type of joint is thus preferred for structural applications. Designing the thread forming fasteners with as-cast holes follows the general rules for designing for the machined holes, including carefully designing the variables such as the assembly torque range, the length of thread engagement, the hole diameter and required failure mode. In addition, special attention needs to be paid to the draft angles of the magnesium cast components that are required for the die casting process. In this paper, the effects of above key factors, individually and combined, on the joint performance of thread forming fasteners with as-cast blind holes of AM60B magnesium components are studied. A joint design philosophy was proposed to optimize both joint performance (the prevailing torque, the failure torque and the failure mode) and manufacturing easiness (the hole diameter and corresponding draft angle). The detailed design considerations for as-cast holes of magnesium HPDC are discussed and explained through a hypothetical example.