Although seafloor massive sulfide (SMS) deposits are crucially important metal resources that contain high‐grade metals such as copper, lead, and zinc, their internal structures and generation mechanisms remain unclear. This study obtained detailed near‐seafloor images of electrical resistivity in a hydrothermal field off Okinawa, southwestern Japan, using deep‐towed marine electrical resistivity tomography. The image clarified a semi‐layered resistivity structure, interpreted as SMS deposits exposed on the seafloor, and another deep‐seated SMS layer at about 40‐m depth below the seafloor. The images reinforce our inference of a new mechanism of SMS evolution: Upwelling hydrothermal fluid is trapped under less‐permeable cap rock. The deeper embedded SMS accumulates there. Then hydrothermal fluids expelled on the seafloor form exposed SMS deposits.
14 February 2022 in Journal of Geophysical Research: Solid Earth
Fluids within the Earth's crust may exist under supercritical conditions (i.e., >374°C and >22.1 MPa for pure water). Supercritical geothermal reservoirs at depths of 2–10 km below the surface in northeastern (NE) Japan mainly consist of magmatic fluids that exsolved from the melt during the course of fractional crystallization. Supercritical geothermal reservoirs have received attention as next‐generation geothermal resources because they can offer significantly more energy than that obtained from conventional geothermal reservoirs found at temperatures 400°C) with dimensions of 3 km (width) × 5 km (length) at a depth of 2.5–6.0 km below the surface. The estimated fluid fraction of the reservoir is 0.1%–4.2% with salinity values of 5–10 wt%. The melt is also imaged below the reservoir, and based on the resistivity model; we develop a mechanism for the evolution of the supercritical geothermal reservoir, wherein upwelling supercritical fluids supplied from the melt are trapped under less permeable silica sealing and accumulate there.
A 3D marine controlled-source electromagnetic (CSEM) survey for mapping hydrocarbons uses dozens of ocean-bottom electric (OBE) receivers deployed in a grid pattern and several transmitter towlines. This study considers seafloor massive sulfides (SMS) exploration, and the horizontal survey scale of SMS is a few kilometers, which is small compared with hydrocarbon surveys of tens of kilometers. If we apply a 3D CSEM survey using a receiver deployment on grids to map SMS, high survey costs will be incurred despite the small survey size. We have developed a cost-effective 3D marine CSEM survey that uses fewer receivers than the survey with a receiver deployment on grids to reduce survey costs for SMS. This CSEM survey uses a line of OBE receivers in the center of the survey area and several transmitter towlines. Numerical tests demonstrate that our survey (seven OBE receivers) using 80% fewer receivers than the survey with a receiver deployment on grids (35 OBE receivers) is able to accurately map SMS, obtaining a performance similar to that of the receiver deployment on grids. Then, we explore SMS in the Ieyama hydrothermal area off Okinawa, southwest Japan, using our 3D CSEM survey with a line of six OBE receivers and three transmitter towlines. The resulting 3D resistivity distribution from the observed data highlights three potential SMS zones consisting of 0.2 ohm-m low resistivity embedded into 1 ohm-m sediment.
Coastal freshwater provides a water source for more than one billion people living in coastal regions. For sustainable groundwater management in coastal areas, an understanding of freshwate...
Deep-sea massive sulfide deposits formed by hydrothermal fluid circulation are potential metal resources. They can exist not only as mound manifestations on the seafloor (seafloor massive sulfides) but also as embedded anomalies buried beneath the seafloor (embedded massive sulfides). The distribution of embedded massive sulfides is largely unknown, despite their expected high economic value. Recent drilling surveys have revealed a complex model suggesting embedded massive sulfides coexist beneath seafloor massive sulfides. In the coexisting case, geophysical methods are required to distinguish and map seafloor and embedded massive sulfides for accurate resource estimation. Marine controlled-source electromagnetic (CSEM) methods are useful for mapping massive sulfides because they exhibit higher electrical conductivity compared with the surrounding host rock. However, CSEM applications capable of distinguishing and mapping the massive sulfides are lacking. We use a towed electric dipole transmitter with two types of receivers: stationary ocean-bottom electric (OBE) and short-offset towed receivers. This combination uses differences in sensitivity: the towed receiver data are sensitive to seafloor massive sulfides, and the stationary OBE receiver data are sensitive to embedded massive sulfides. Our synthetic data example demonstrates that the combined inversion of towed and OBE data can recover resistivities and positions of the massive sulfides more accurately than existing inversion methods using individual applications. We perform the combined inversion of measured CSEM data obtained from the middle Okinawa Trough. The inversion models demonstrate that a combined inversion can map the location and shape of embedded massive sulfides identified during drilling more accurately than the inversion of individual data sets.
Blurred resistivity boundaries resulting from smoothness-regularized inversions of electrical resistivity tomography (ERT) data can lead to inaccurate interpretations of sharp boundary structures. To address this issue, various ERT inversion algorithms have introduced localized adjustments (localized discontinuities) in the regularization operator at positions where sharp boundaries are anticipated. Current approaches rely on prior information about sharp boundary locations, obtained from complementary geophysical, geologic, and drilling data, to determine the positions and weights for these regularization adjustments. However, such prior information is frequently insufficient, limiting the application of localized regularization adjustments. Accordingly, we develop a sharp boundary inversion (SBI) algorithm using the Akaike Bayesian information criterion (ABIC) that determines the optimal positions and weights for localized regularization adjustments by testing various configurations and selecting the one that minimizes ABIC. A synthetic modeling study demonstrates that the SBI algorithm correctly delineated the sharp boundaries of a conductor. Its application to field data demonstrates that it delineated the sharp boundaries of a utility tunnel, and the size and horizontal position of the recovered tunnel were consistent with the estimated dimensions from the blueprint. As it does not rely heavily on prior information, the SBI algorithm can be applied to a wide range of geophysical survey data, even when prior knowledge of sharp boundary locations is limited.