Photoelectric and Energy Device Application Lab (PEDAL), Multidisciplinary Core Institute for Future Energies (MCIFE) and Department of Electrical Engineering Incheon National University 119 Academy Rd. Yeonsu Incheon 22012 Republic of Korea
Auto-generated profile, based on publicly available information
Sangho Kim
Photoelectric and Energy Device Application Lab (PEDAL), Multidisciplinary Core Institute for Future Energies (MCIFE) and Department of Electrical Engineering Incheon National University 119 Academy Rd. Yeonsu Incheon 22012 Republic of Korea
Invisible power generation by natural and artificial light enables sustainability by onsite‐power deployment, lower cost, and minimal burden on the built environment. However, dark, opaque photovoltaics limit light utilization in a transparent way. Herein, it is proposed that the active energy window (AEW) invisibly features power production, providing higher freedom for onsite power generators in window objects without limiting human vision. The AEW has a transparent photovoltaic (TPV) for onsite power and a transparent heater (TH) to remove the effects of shadows from snow and recover the power lost. Moreover, a heating function is applied to remove the effects of weathering related to snow. The proposed prototype integrates a TPV‐TH, offering ultraviolet (UV)‐blocking, daylighting, thermal comfort, and onsite power with a power conversion efficiency of 3% (AM1.5G). Field‐induced transparent electrodes are applied to the TPV‐TH and designed considering the AEW. Owing to these electrodes, the AEW ensure a wide field‐of‐view without optical dead zones, ensuring see‐through vision. The first TPV‐TH integration is performed into a 2 cm2‐window that generates onsite power of 6 mW and has an average visible transmittance of ≈39%. It is believed that light can be utilized with comfort through the AEW in self‐sustainable buildings and vehicles.
The back surface field (BSF) plays an important role for the efficiency of the heterojunction intrinsic thin-film (HIT) solar cell. In this paper, the effect of thickness variation in n-type micro crystalline BSF layer was investigated by Raman and spectroscopy ellipsometry. As we increase the crystalline volume fraction (Xc) from 6% to 59%, the open circuit voltage (Voc) increases from 573 to 696 mV with increase in fill factor from 59% to 71%. However, we observed that Voc and FF are decreased over 59% Xc of n-type μc-Si:H BSF layer. It seems that higher Xc micro layer include lots of defects. The quantum efficiency (QE) measurements were demonstrated on optimized thickness of n-doped micro BSF layer. In the long wavelengths region, the QE slightly increases with increasing the n-type μc-Si:H BSF layer thickness from 10 to 40 nm because of BSF effect, whereas the QE decreases when n-type μc-Si:H BSF layer thickness increases from 40 to 120 nm due to defects in the layer. The performance of heterojunction solar cell device was improved with the optimized thickness on n-doped micro BSF layer the best photo voltage parameters of the device were found to be Voc of 696 mV, short-circuit current density of 36.09 mA/cm2 and efficiency of 18.06% at n-doped micro BSF layer thickness of 40 nm.