This paper describes an intelligent space, whose objective is to localize and control robots or robotic wheelchairs to help people. Such an intelligent space has 11 cameras distributed in two laboratories and a corridor. The cameras are fixed in the environment, and image capturing is done synchronously. The system was programmed as a client/server with TCP/IP connections, and a communication protocol was defined. The client coordinates the activities inside the intelligent space, and the servers provide the information needed for that. Once the cameras are used for localization, they have to be properly calibrated. Therefore, a calibration method for a multi-camera network is also proposed in this paper. A robot is used to move a calibration pattern throughout the field of view of the cameras. Then, the captured images and the robot odometry are used for calibration. As a result, the proposed algorithm provides a solution for multi-camera calibration and robot localization at the same time. The intelligent space and the calibration method were evaluated under different scenarios using computer simulations and real experiments. The results demonstrate the proper functioning of the intelligent space and validate the multi-camera calibration method, which also improves robot localization.
Performance of photovoltaic generators is affected by, among other factors, surface dust deposition on photovoltaic modules, which causes uniform soft shading, reducing the solar radiation reaching photovoltaic cells. Several researches have demonstrated this effect through studies in specific localities. As deposition of particulate matter varies according to locality, these results cannot be generalized or used in other places, since these studies do not characterize their local dust. Considering these research opportunities, this paper evaluates the deposition effects on photovoltaic modules by different types of dust from anthropogenic activities recurrent in urban areas, a typical situation of distributed microgeneration. Particulate matter of iron ore, building construction, quarry, and mineral coal are characterized morphologically and dimensionally. Then, their effects on photovoltaic module performance are analyzed under different deposition densities according to typical urban deposition rates. The results show that the different dust materials studied attenuate the power generation capacity to different extents, and superficial dust density of the particulate matter also produces different effects. These results can be used in performance and economic feasibility analyzes of photovoltaic generators in different locations with similar pollution characteristics.