1 December 2022 in Engineering Applications of Artificial Intelligence
6 May 2012 in Discover Nano
Since the photoelectric response and charge carriers transport can be influenced greatly by the density and spacing of the ZnO nanorod arrays, controlling of these geometric parameters precisely is highly desirable but rather challenging in practice. Here, we fabricated patterned ZnO nanorod arrays with different densities and spacing distances on silicon (Si) substrate by electron beam lithography (EBL) method combined with the subsequent hydrothermal reaction process. By using the EBL method, patterned ZnO seed layers with different areas and spacing distances were obtained firstly. ZnO nanorod arrays with different densities and various morphologies were obtained by the subsequent hydrothermal growth process. The combination of EBL and hydrothermal growth process was very attractive and could make us control the geometric parameters of ZnO nanorod arrays expediently. Finally, the vertical transport properties of the patterned ZnO nanorod arrays were investigated through the microprobe station equipment, and the I-V measurement results indicated that the back-to-back Schottky contacts with different barrier heights were formed in dark conditions. Under UV light illumination, the patterned ZnO nanorod arrays showed a high UV light sensitivity, and the response ratio was about 104. The controllable fabrication of patterned ZnO nanorod arrays and understanding their photoelectric transport properties were helpful to improve the performance of nanodevices based on them.
16 January 2025 in IEEE Transactions on Industrial Informatics
Hybrid energy storage system (HESS) in microgrid applications is controlled to balance the power between generation and load sides. However, power loss of converting and model parameter mismatch would affect the control performance. To this end, a deadbeat control algorithm for HESS combined with deep reinforcement learning is proposed in this article. In the proposed method, the variation of optimal HESS current reference caused by nonlinear power loss and model mismatch is regarded as a centralized disturbance that can be compensated by a deep deterministic policy gradient agent, and a deadbeat control generates an optimal duty cycle based on a precise reference current to eliminate system steady-state error and improve dynamic response speed. The effectiveness of the proposed algorithm is verified through simulation and hardware experiments. Results demonstrate that the steady-state error can be maintained within 1%. Compared to conventional deadbeat control methods, the proposed method reduces the bus voltage spike and settling time by 34.24%–44.44% and 16.66%–40.00%, respectively.
1 January 2015 in Mathematical Problems in Engineering
Demand response (DR) is an effective method to lower peak-to-average ratio of demand, facilitate the integration of renewable resources (e.g., wind and solar) and plug-in hybrid electric vehicles, and strengthen the reliability of power system. In smart grid, implementing DR through home energy management system (HEMS) in residential sector has a great significance. However, an algorithm that only optimally controls parts of HEMS rather than the overall system cannot obtain the best results. In addition, single objective optimization algorithm that minimizes electricity cost cannot quantify user’s comfort level and cannot take a tradeoff between electricity cost and comfort level conveniently. To tackle these problems, this paper proposes a framework of HEMS that consists of grid, load, renewable resource (i.e., solar resource), and battery. In this framework, a user has the ability to sell electricity to utility grid for revenue. Different comfort level indicators are proposed for different home appliances according to their characteristics and user preferences. Based on these comfort level indicators, this paper proposes a multiobjective optimization algorithm for HEMS that minimizes electricity cost and maximizes user’s comfort level simultaneously. Simulation results indicate that the algorithm can reduce user’s electricity cost significantly, ensure user’s comfort level, and take a tradeoff between the cost and comfort level conveniently.
27 January 2025 in IEEE Transactions on Intelligent Transportation Systems
With electric vehicles (EVs) and charging facilities as a bridge, the coupling of transportation network (TN) and distribution network (DN) is getting closer, and EV charging navigation considering TN-DN convergence is a current research hotspot. In order to reduce the total cost of EV charging navigation and the impact of charging load on the grid, this paper proposes a novel bi-layer coordinated charging navigation model (Bi-CCNM). The upper layer model is to minimize the total cost of EV charging navigation. To precisely estimate travel costs, a dynamic spatio-temporal energy consumption estimation model is established, which considers the impact of dynamic traffic flow on EV travel resistance. The lower layer model aims to reduce energy exchange between the charging station (CS) and the main grid, and maximize the utilization of local renewable energy sources. To cope with the intermittent nature of renewable energy generation, this paper utilizes Vehicle-to-Grid (V2G) technology to effectively mitigate the impact of EV charging loads on the grid. To efficiently tackle the Bi-CCNM, the Joint Optimization algorithm combining Generalized Benders Decomposition and Logarithmic Barrier Function Method (JO-GBLB) is developed. Ultimately, an optimal solution can be obtained through the interaction of information between the two layers. Real-world case validates the effectiveness of the proposed the Bi-CCNM, energy consumption estimation model, and JO-GBLB algorithm. The results indicate which it provides a low-cost charging navigation solution while significantly reducing the power exchange between the CS and the main grid, effectively preventing safety issues caused by load fluctuations. Besides, the accuracy of energy consumption estimation of EVs increases by 5.1% -6.7%.