Electric vehicles (EVs) mainly use permanent magnet synchronous motors (PMSMs) as the core power units. Moreover, when EVs navigate complex roads, the requirements become even more stringent. This paper addresses the real-time parameter estimation and state evaluation of PMSMs in EVs, considering the inevitable external interference. By leveraging the stability condition of the energy function, a simple adaptive scheme is proposed to enhance the robustness of PMSMs against current disturbances. At the same time, the online identification scheme for motor parameters is considered, which extends the practical application method of Lyapunov energy function stability. Subsequently, in order to optimize the current disturbance caused by parameter mismatch, the known model will be adjusted to the unknown model and the adaptive fuzzy scheme is introduced to discuss with the relevant parameters designed from the stability condition of the adaptive fuzzy Lyapunov energy function. Finally, the effectiveness of the proposed scheme in this paper is proved by various experiments.
16 April 2021 in IET Control Theory & Applications
A fractional order sliding mode control (FOSMC) based on single parameter adaptive law for nano‐positioning of Piezoelectric Actuators (PEAs) is proposed. First, the Bouc–Wen (B–W) model is used to describe the hysteresis of the nano‐position platform based on PEAs, which provides a mathematical model for the subsequent controller design. Then, theoretical support is provided to design the FOSMC based on adaptive law of different parameters, which are proposed for the displacement tracking problem of PEAs, and the position error convergence is also proved. Moreover, the core parameters of FOSMC based on single parameter adaptive law are identified by hybrid differential evolution (HDE) and adaptive differential evolution (ADE), which require considering the relationship between the scaling factor and the cross‐probability factor. Finally, experiments have been conducted with the displacement signals mixed with multiple frequencies and multiple amplitudes and the results obtained from them show that the proposed control scheme can produce a faster response and smaller tracking errors in PEAs system as compared to traditional control algorithms.
Commutation torque ripple is an important factor affecting the performance of brushless DC (BLDC) motor drives. In order to suppress this torque ripple, an alternating conduction control strategy between the two‐phase and three‐phase conduction mode has been proposed in this study. During the non‐commutation periods, the conventional two‐phase conduction mode is selected to drive the BLDC motor. While during the commutation period, the commutation torque ripple is reduced by employing an alternating two‐phase and three‐phase conduction mode. By calculating the duty cycle of the three‐phase conduction mode, which indicates whether the rate of change in current in the incoming and outgoing phase is equal during the commutation interval, the commutation torque ripple is effectively reduced, while the current in the non‐commutated phase is maintained constant. Simulation and experimental results show that the proposed method can suppress the commutation torque ripple efficiently, particularly at high rotational speeds of the motor.
The traditional six-step commutation control method in brushless DC motors (BLDCM) often results in significant torque ripple, which limits its application in high-precision fields. This paper proposes a scheme that combines finite control set model predictive control (FCS-MPC) to suppress commutation torque ripple. The scheme utilizes an optimal duty cycle and optimal switch compensation state. By analyzing the mathematical model of BLDC motors, the causes of commutation torque ripple were identified. To maintain the slope of the non-commutation current unchanged, a discrete model was used to predict the non-commutation current at the next moment. The predicted current was then used to calculate the optimal duty cycle. To address the shortcomings of PWM regulation performance at high speeds, a switch insertion compensation strategy was proposed. The strategy selects the optimal switch insertion compensation state based on a cost function to offset the changes in non-commutation current. Furthermore, feedback compensation was incorporated to enhance robustness in the event of parameter mismatch. The effectiveness of this method was demonstrated through experimental and simulation results.