Hierarchical oxides based on CeO2 and Al2O3 were prepared by the sol-gel method and were characterized by SEM, low-temperature nitrogen adsorption–desorption, X-ray diffraction analysis, and in situ Raman spectroscopy. The samples had the specific surface area of up to 200 m2/g with the pore size from 2 to 40 nm. They were tested in the synthesis of dimethyl carbonate from carbon dioxide and methanol. The samples with different cerium content differ in the pore structure characteristics and catalytic properties. Pure cerium(IV) oxide is the most active and exhibits 100% selectivity with respect to dimethyl carbonate. The optimum reaction conditions are 130°С and a pressure of 5 MPa.
A series of catalysts for the conversion of carbon dioxide to dimethyl ether were synthesized by depositing ZnGa2O4 spinel on mesoporous aluminosilicate materials, specifically MCM-41 and SBA-15. The samples were tested at 200°C and 2.7 MPa and characterized by low-temperature nitrogen adsorption, chemical analysis, X-ray diffraction, small-angle X-ray diffraction, ammonia temperature-programmed desorption, and scanning electron microscopy. CO2 conversion reached 17% and did not depend on the support’s pore size but was governed solely by the oxide component type. Dimethyl ether selectivity correlated directly with support acidity.