Hierarchical oxides based on CeO2 and Al2O3 were prepared by the sol-gel method and were characterized by SEM, low-temperature nitrogen adsorption–desorption, X-ray diffraction analysis, and in situ Raman spectroscopy. The samples had the specific surface area of up to 200 m2/g with the pore size from 2 to 40 nm. They were tested in the synthesis of dimethyl carbonate from carbon dioxide and methanol. The samples with different cerium content differ in the pore structure characteristics and catalytic properties. Pure cerium(IV) oxide is the most active and exhibits 100% selectivity with respect to dimethyl carbonate. The optimum reaction conditions are 130°С and a pressure of 5 MPa.
One-step gas-phase synthesis of butadiene from formaldehyde and propylene on aluminum (AlP), zirconium (ZrP), and niobium (NbP) phosphates with the pore volumes of 0.51, 0.25, and 0.19 cm3/g, respectively, was studied for the first time. The physicochemical properties of the catalysts were studied by X-ray fluorescence analysis, low-temperature nitrogen adsorption, X-ray diffraction analysis, scanning electron microscopy, temperature-programmed NH3 desorption, IR spectroscopy of adsorbed pyridine, and 31Р MAS NMR. Evaluation of the catalytic properties of the phosphates showed that they can be ranked in the following order with respect to the formaldehyde conversion and target product (butadiene) formation selectivity: AlP < ZrP < NbP, which correlates with metal electronegativity series. The СН2О conversion on the most active NbP was 4.5%, and the molar selectivity of the butadiene formation was 45.3%.
Approaches to the development of submicron and nanocrystalline silicate materials of MFI structure in a fluorinated surfactant medium were studied with perfluorononanoic acid as an example. In fluorinated surfactants, the crystal structure of the zeolite framework is formed more slowly than in the case of silicalite-1 because of the presence of aluminum atoms. The fractions of the formed Brønsted and Lewis acid sites in zeolites are independent of the amount of aluminum introduced into the reaction mixture. In oligomerization of light alkenes, the activity and operation stability of the synthesized zeolite with lower concentration of Brønsted acid sites and smaller crystal size are similar to those of the commercially available catalyst.