We demonstrate ferroelectric (FE) memory transistors on a crystalline silicon channel with endurance exceeding 10 10 cycles. The ferroelectric transistors (FeFETs) incorporate a high- $\kappa $ interfacial layer (IL) of thermally grown silicon nitride (SiN x ) and a thin 4.5 nm layer of Zr-doped FE-HfO 2 (HZO) on a ~30 nm silicon on insulator (SOI) channel. The device shows a ~1V memory window (MW) in a DC sweep of just ± 2.5V, and can be programmed and erased with voltage pulses of $\text {V}_{\text {G}}= \pm \,\,3\text{V}$ at a pulse width of 250 ns. The device also shows very good retention behavior. These results indicate that appropriate engineering of the IL layer could substantially improve FeFET device performance and reliability.
7 September 2018 in ACS Applied Materials & Interfaces
Ferroelectric field-effect transistors (FeFETs) based on HfO 2 are promising for low-power and high-speed non-volatile memory devices. However, most reported FeFETs show limited write endurance and significant read-after-write delay due to parasitic charge trapping. Here we show that n-type FeFETs with SiN x interfacial layer and high write endurance also exhibit immediate read-after-write behavior due to negligible charge trapping. This overcomes one of the major challenges faced by FeFET technologies today.