Washing is a commonly used method to remove surface impurities of cathode materials for lithium-ion batteries. However, a clear mechanistic understanding of the washing process is missing in the literature. In this study, we will investigate the effect of washing and subsequent drying of nickel-rich NCM cathodes (85% nickel) with respect to gassing and impedance of the washed cathodes. By on-line electrochemical mass spectrometry (OEMS), we will show a drastic reduction of the O2 release above 80% SOC for the NCM washed with deionized water, suggesting the formation of an oxygen-depleted surface layer on the NCM particle surface. The modification of the surface can be confirmed by a strong impedance buildup of cathodes composed of washed NCM (using a micro-reference electrode in a full-cell), revealing that the impedance increases strongly with increasing drying temperature after washing. Last, we will propose a comprehensive mechanism on the processes occurring during the washing/drying process of nickel-rich NCM materials and identify the drying temperature after washing as the dominant factor influencing the surface properties.
The quality of metal oxide-based battery active materials is compromised by surface contamination from storage and handling at ambient conditions. We present a detailed analysis of the true nature and the quantity of the surface contaminants on two different cathode active materials, the widely used LiNi1/3Co1/3Mn1/3O2 (NCM111) and the Ni-rich LiNi0.8Co0.1Mn0.1O2 (NCM811). We process these materials in three distinct conditions “wet” (excessive exposure to moisture), “dry” (standard drying of as-received materials), and “calcined” (heat-treatment of cathode powders). Surface contaminants are then quantified by thermogravimetric analysis coupled with mass spectrometry (TGA-MS), and their reactivity with an ethylene carbonate-based electrolyte is evaluated using on-line mass spectrometry (OMS). We demonstrate that not only the commonly assumed LiOH and Li2CO3 residues account for NCM performance deterioration upon storage in moisture and CO2 containing atmosphere, but also basic transition metal hydroxides/carbonates formed on the material surface. Eventually, we showcase a thermal treatment that removes these transition metal based surface contaminants and leads to superior cycling stability.
25 March 2015 in Journal of the Electrochemical Society
The anodic oxidation stability of battery components like the conductive carbon black (Super C65) and the co-solvent ethylene carbonate (EC) is of great relevance, especially with regards to high-voltage cathode materials. In this study, we use On-line Electrochemical Mass Spectrometry (OEMS) to deconvolute the CO and CO2 evolution from the anodic oxidation of carbon and electrolyte by using a fully 13C-isotope labeled electrolyte based on ethylene carbonate with 2 M LiClO4. We present a newly developed two-compartment cell, which provides a tight seal between anode and cathode compartment via a solid Li+-ion conducting separator, and which thus allows us to examine the effect of trace amounts of water on the anodic oxidation of carbon (12C) and ethylene carbonate (13C) at high potentials (> 4.5 V) and 10 to 60°C. Moreover, we report on the temperature dependence of the water-driven hydrolysis of ethylene carbonate accompanied by CO2 evolution. Finally, by quantifying the evolution rates of 12CO/12CO2 and 13CO/13CO2 at 5.0 V, we demonstrate that the anodic oxidation of carbon and electrolyte can be substantial, especially at high temperature and in the presence of trace water, posing significant challenges for the implementation of 5 V cathode materials.