1 December 2018 in Engineering Structures
1 January 2024 in Journal of the Serbian Chemical Society
The durability of concrete structures, which are designed for long-term use is predominantly determined by the resistance to chemical influences, i.e., the concrete?s ability to protect the reinforcement steel. The carbonation and the chloride ingress into concrete are the most significant causes of steel corrosion and the potential failure of the structure. The primary goal is to ensure that any significant damage does not occur during the structure's service life, primarily achieved by selecting an adequate thickness of the concrete cover. The issue is approached through calculations based on performance analyses, and the use of appropriate models for these chemical phenomena. The paper provides a brief overview and the methodology for analysing the impact on the durability of concrete structures in accordance with the leading international normative documents. The emphasis is on the recent changes introduced in second generation of European Eurocode standards. The consequences of the analysed phenomena are presented through the results of field tests conducted at salt factories, coke industries, and thermal power plants, and through laboratory tests. The tests were performed in order to develop a rapid prediction method for the measure of chloride ingress into concrete without the stimulating chloride ion migration by electricity, as an alternative to standardized tests.
1 January 2024 in Facta universitatis - series: Architecture and Civil Engineering
The paper emphasizes the advantages of using FRP (fiber reinforced polymer) materials for strengthening reinforced concrete structures. The results of experimental research on the effects of strengthened reinforced concrete beam elements exposed mainly to bending using FRP rod-shaped elements are presented. The load disposition (experimental setup) was in accordance with the "four point load" scheme, and the measurements were made using modern measuring techniques. The results regarding the increase in the bearing capacity of strengthened beams using the NSM (near surface mounting) and EB (externally bounding) methods were compared. In particular, the loaddeflection ratio until failure was analyzed, as well as the change in stiffness depending on the load level. It has been shown that the load capacity of beams strengthened with carbon fiber rods (NSM CFRP) increases by 89%, and the load capacity of beams strengthened with glass fiber rods (NSM GFRP) by 73%. The bearing capacity of beams strengthened with EB CFRP laminates increases by 51%. The ductility of strengthened beams was analyzed and it was shown that it is higher when using GFRP rod-shaped elements (DI=6.5) compared to CFRP rods (DI=5.3). The ductility of the beams strengthened by the EB CFRP method was not satisfactory (DI=2.6).