2 November 2023 in Journal of Lightwave Technology
We propose an approach to interconnect a hollow-core fiber (HCF) of arbitrary core size with standard single-mode fiber with perfect mode-field size adaptation and experimentally achieve for the first time insertion loss agreeing with that predicted by simulations. We demonstrate this using three low-loss HCFs, including 1st window nested antiresonant nodeless fiber (NANF), 2nd window NANF and the state-of-the-art double NANF (DNANF). The connection with a minimum achieved insertion loss of 0.079 dB was permanently secured via gluing and did not degrade during 4 weeks of continuous measurement. To the best of our knowledge, this is the lowest reported value and is comparable to or lower than the connection between dissimilar single-mode fibers (e.g., standard single-mode fiber and dispersion-compensating fiber). We also show that such connection leads to excellent suppression of higher-order modes coupling, of importance to all applications sensitive to multi-path interference. Importantly, obtaining agreement between simulations and experiments validates for the first time the accuracy of the simulations and opens the door to further optimization via simulations with the ability to subsequently achieve the same result experimentally.
4 November 2019 in Optics Express
Two experimental configurations of a hybrid K-band (25 GHz) microwave photonic link (MPL) are investigated for seamless broadband wireless access networks. Experimental configurations consist of optical fiber, free-space optics (FSO) and radio frequency (RF) wireless channels. We analyze in detail the effects of channel impairments, namely fiber chromatic dispersion, atmospheric turbulence and multipath-induced fading on the transmission performance. In the first configuration, transmission of the 64-quadrature amplitude modulation (QAM) signal with 5, 20 and 50 MHz bandwidths over 5 km standard single-mode fiber (SSMF), 2 m turbulent FSO and 3 m RF wireless channels is investigated. We show that, for QAM with a high bandwidth, the link performance is being affected more by atmospheric turbulence. In the second configuration, the 20 MHz 4/16/64-QAM signals over a 50 km SSMF and 40 m FSO/RF wireless links are successfully transmitted with the measured error vector magnitude (EVM) values of 12, 9 and 7.9%, respectively. It is shown that, for all transmitted microwave vector signals, the bit error rate is lower than the hard-decision forward-error-correction limit of 3.8×10−3. Moreover, an extended FSO link span of 500 m for 25 GHz hybrid MPL with 16-QAM at 10 Gb/s under the weak and strong turbulence regimes is evaluated via simulation analysis to mimic a practical outdoor system.
12 February 2020 in Journal of Lightwave Technology
We made and characterized two Fabry-Perot interferometer samples made of the latest-generation hollow core fiber with sub-1-dB/km loss. Thanks to this low transmission loss, we achieved a finesse of over 140 and 120, for interferometer lengths of 5 and 23 m, respectively. This resulted in transmission peaks as narrow as 47 kHz. Our all-fiber Fabry-Perot interferometers have standard single-mode fiber pigtails (for easy integration in conventional fiber optic systems) and employ fiber mode field adapters to enable low-loss coupling between the pigtails and the low-loss hollow core fiber. The high-reflectivity mirrors (>98 %) were deposited directly on the fiber mode field adapters, which were glued to the hollow core fiber, resulting in permanently-aligned Fabry-Perot interferometers. We also measured how the position of the transmission peaks change with temperature (an important performance metrics for most applications, e.g., when used as a narrow-band band-pass filter) and found that it changed 14.5 times less in our Fabry-Perot interferometer relative to a similar device made of standard single mode fiber.