Today’s lowest-loss hollow core fibers are based on antiresonance guidance. They have been shown both theoretically and experimentally to have very low levels of backscattering arising from the fiber structure – 45 dB below that of traditional optical fibers with a solid silica glass core. This makes their longitudinal characterization using conventional reflectometric techniques very challenging. However, it was recently estimated that when filled with air, their backscattering coefficient increases to about 30 dB below that of standard solid core fibers. This level should be measurable with commercially available high performance optical time domain reflectometers (OTDR). Here we demonstrate – for the first time to the best of our knowledge – the measurement of backscattering from the air inside a hollow core fiber. We show that the characterization of multi-km long hollow core fibers with 15 m spatial resolution is possible using a commercial OTDR instrument. To benefit from its full dynamic range, we strongly suppress the 4% back-reflections that ordinarily occur at the OTDR’s standard fiber output when directly-connected to a hollow core fiber. Furthermore, low coupling loss into the hollow core fiber (0.3 dB in our experiment) also helps to maximize the achievable OTDR signal-to-noise ratio. This approach enables distributed characterization and fault-finding in low-loss hollow core fibers, a topic of increasing importance as these fibers are now starting to be installed in commercial optical communication networks.

We propose an approach to interconnect a hollow-core fiber (HCF) of arbitrary core size with standard single-mode fiber with perfect mode-field size adaptation and experimentally achieve for the first time insertion loss agreeing with that predicted by simulations. We demonstrate this using three low-loss HCFs, including 1st window nested antiresonant nodeless fiber (NANF), 2nd window NANF and the state-of-the-art double NANF (DNANF). The connection with a minimum achieved insertion loss of 0.079 dB was permanently secured via gluing and did not degrade during 4 weeks of continuous measurement. To the best of our knowledge, this is the lowest reported value and is comparable to or lower than the connection between dissimilar single-mode fibers (e.g., standard single-mode fiber and dispersion-compensating fiber). We also show that such connection leads to excellent suppression of higher-order modes coupling, of importance to all applications sensitive to multi-path interference. Importantly, obtaining agreement between simulations and experiments validates for the first time the accuracy of the simulations and opens the door to further optimization via simulations with the ability to subsequently achieve the same result experimentally.

Two experimental configurations of a hybrid K-band (25 GHz) microwave photonic link (MPL) are investigated for seamless broadband wireless access networks. Experimental configurations consist of optical fiber, free-space optics (FSO) and radio frequency (RF) wireless channels. We analyze in detail the effects of channel impairments, namely fiber chromatic dispersion, atmospheric turbulence and multipath-induced fading on the transmission performance. In the first configuration, transmission of the 64-quadrature amplitude modulation (QAM) signal with 5, 20 and 50 MHz bandwidths over 5 km standard single-mode fiber (SSMF), 2 m turbulent FSO and 3 m RF wireless channels is investigated. We show that, for QAM with a high bandwidth, the link performance is being affected more by atmospheric turbulence. In the second configuration, the 20 MHz 4/16/64-QAM signals over a 50 km SSMF and 40 m FSO/RF wireless links are successfully transmitted with the measured error vector magnitude (EVM) values of 12, 9 and 7.9%, respectively. It is shown that, for all transmitted microwave vector signals, the bit error rate is lower than the hard-decision forward-error-correction limit of 3.8×10⁻³. Moreover, an extended FSO link span of 500 m for 25 GHz hybrid MPL with 16-QAM at 10 Gb/s under the weak and strong turbulence regimes is evaluated via simulation analysis to mimic a practical outdoor system.

We present a new approach to permanently interconnect hollow-core fiber (HCF) to solid-core fiber, which does not involve fusion splicing. Our approach is based on a modification of the glue-based fiber-array technology routinely used for fiber pigtailing of planar lightwave circuits. The resulting interconnection provides for a low insertion loss due to the fact that the HCF microstructure is not deformed during the gluing (low temperature) process that is almost impossible to achieve with the standard (high temperature) fusion splicing method. Furthermore, this low temperature technique enables the deposition and preservation of thin films deposited at the solid-to-hollow core fiber interface, allowing for additional functionality without the introduction of extra losses or any increase in complexity. To demonstrate this, we have applied an anti-reflection (AR) coating. A further feature of our approach is the ability to control very precisely the length of the graded-index (GRIN) fiber mode field (MF) adapter inserted in between the standard singlemode fiber (SMF-28) and the HCF. We show experimentally how the length of the GRIN fiber MF adapter influences the coupling between the SMF-28 and the fundamental as well as higher-order modes of the HCF. We coupled between SMF-28 (10 μm Mode Field Diameter, MFD) and the fundamental mode of a 19-cell hollow- core photonic bandgap fiber (HC-PBGF, 21.1 μm MFD) with the lowest-ever reported insertion loss of 0.30 dB per interface.

We propose and experimentally demonstrate a photonics-assisted converged radio-over-fiber (RoF), radio-over-free-space optics (RoFSO) and millimeter-wave (MMW) wireless transmission system for use in broadband wireless access (BWA) networks. The focus is at the emerging frequency band of 25 GHz, as recommended for fifth-generation networks. As a proof-of-concept demonstration, all-optical up-converted long-term evolution test models with 4-, 16- and 64-quadrature amplitude modulation (QAM) are transmitted and evaluated over the proposed hybrid link under weak-to-strong atmospheric turbulence regimes. Link performance shows that, the error vector magnitudes are below the 3GPP standard for 4-, 16- and 64-QAM. We also show that, for all QAM signals under turbulence conditions, the bit error rate performance is below the forward error correction limit of 10 ^-3 . Simulation analysis is also performed for the 10 Gb/s hybrid systems under turbulence for an extended FSO link up to 500 m to emulate a practical outdoor environment. Furthermore, we analytically estimate the attainable MMW wireless range for different rain rates in Prague, Czech Republic. The obtained experimental and simulation results confirm the feasibility and potential of the proposed hybrid system for next-generation last mile BWA networks.

This letter presents results of an experimental measurement campaign involving the deployment of combined radio over the fiber and radio over free space optics (FSO) technology in the cloud-based fifth generation (5G) fronthaul network operating in the millimeter wave (mmW) area. For this purpose, we have used 10 km of optical fiber, 50 m long outdoor FSO link and 1 m long antenna seamless radio frequency transmission at 39 GHz. The results show excellent performance in terms of the phase noise and the signal-to-noise (SNR) ratio. The error vector magnitude performance depends on the modulation format and are below the standard limits for the 5G new radio signals, with 400 MHz QPSK and 64-QAM showing almost identical results for SNR of up to ~19 dB whereas 256-QAM signal offering the best spectral efficiency. Moreover, we investigate the received mmW signal deterioration due to the atmospheric conditions in the FSO channel.