1 October 2023 in Petroleum Chemistry
The dynamics of the silicon sorption on the NiMo/Al2O3 guard-bed catalyst containing ~2.0 wt % Ni and ~6.0 wt % Mo during hydrotreating of diesel was studied. The catalyst bed was divided into five equal sections separated by perforated metal partitions permeable to the feed. Four series of experiments were performed; their time was varied in the range 48–200 h, and the temperature was 340°C. A diesel fraction containing ~1.0 wt % sulfur, 130 ppm nitrogen, and 200 ppm silicon introduced in the form of decamethylcyclopentasiloxane was used as the feed. The specific surface area of all the spent samples was 170–190 m2/g, the pore volume was 0.35– 0.43 cm3/g, and the average pore diameter was 8–9 nm. The sorption on a catalyst grain 2.5 mm in diameter is diffusion-controlled. The effective mass transfer coefficient and the catalyst capacity under the experimental conditions (5 wt %) were estimated using the equation describing the sorption process.
25 November 2024 in Energy & Fuels
9 October 2025 in Chimica Techno Acta
Trickle bed reactors with solid catalyst pellets are important and widely used large-scale apparatuses in the chemical and oil refining industries. In order to reduce the effects of poisons on the catalyst bed and to extend the catalyst loading service life as much as possible, guard beds are loaded onto the main catalyst bed, intended for deposition of fine impurities on them, conversion, binding of catalytic poisons and distribution flow. In this research, realistic loadings of guard bed catalyst pellets were constructed. We demonstrated that the process of studying the features of the hydrodynamic structure of the flow proposed in this work can be used to investigate the flow distribution and hydrodynamic resistance in hydroprocessing reactors. The particles are considered to be Raschig Rings 8 and 16 mm (outer diameter and height) with wall thickness of 1, 2 and 3 mm. The effect of particle size on flow distribution was studied using the standard deviation criterion. Based on this criterion, it was found that the loading of Raschig rings with wall thickness of 1 mm is optimal.
1 October 2022 in Petroleum Chemistry
The study investigated thermal carbonization of oil tar in comparison with tar carbonization over a Ni/Sibunit catalyst at 450–600°C. The addition of Ni/Sibunit to the tar slightly enhanced the yield of coke. However, various sulfur compounds released during tar carbonization interact with metallic nickel to form nickel sulfide, thus rapidly deactivating the catalyst in carbonization that occurs by the carbide-cycle mechanism. To suppress the deactivation of 8%Ni/Sibunit under the impact of sulfur compounds, we hydrocracked the tar sample prior to feeding it to the carbonization. The tar hydrocracking was carried out in a flow-type reactor with a fixed bed of sulfided Ni–Mo/Al2O3 catalyst in a hydrogen atmosphere (the other reaction conditions included 16.0 MPa, 420°C, LHSV 0.5 h–1, and a hydrogen/feed ratio of 2000 v/v). The hydrocracking appreciably reduced the content of sulfur and nitrogen in the liquid product. In the presence of 8%Ni/Sibunit, the carbonization of the liquid tar hydrocracking product enhanced the yield of coke compared to that in the thermal carbonization. The catalytic carbonization was found to change the carbon morphology. Specifically, in the 8%Ni/Sibunit addition case, carbon nanofibers 15–40 nm in diameter were detected. In addition to the carbon nanofibers, the formation of amorphous carbon sheets was observed.
22 November 2024 in Chimica Techno Acta
In this work two samples of solid particulates obtained from the intergranular space of the guard beds catalyst of industrial gas oil hydrotreating reactors were investigated. The hydrotreating reactors were operated on feedstock of different composition. One of the samples of solid particulates was obtained during hydrotreating of feedstock containing a large amount of sodium and calcium. The compositions of the samples of solid particulates were determined. Quantitative elemental and structural analyses were carried out. As a result, the formed solid particulates contained a large amount of sodium chloride, sulfate and calcium sulfide. The qualitative calculations show that the pressure drop in the guard bed of five-segment rings with a diameter of 16.0 mm, due to the deposition of solid particulates in the intergranular space, increases by 108% more than the pressure drop during hydrotreating of feedstock not containing calcium and sodium compounds (under the same operating modes of the hydrotreating reactors and operating time). The obtained results on the effect of the feedstock composition on the pressure drop buildup can be used in optimizing the loading of reactors and in other oil refining processes.
1 January 2026 in Catalysis Science & Technology
The effect of combining two ultrastable Y (USY) zeolites (Y1 and Y2) with different acidities on the performance of NiW/Y catalysts in second-stage hydrocracking was investigated.