A continuous-wave (CW) single-longitudinal-mode (SLM) intracavity Raman laser is demonstrated for the first time, by virtue of the spatial hole-burning free nature of stimulated Raman scattering (SRS) gain. By using a single etalon in the Nd:GdVO4 fundamental laser cavity, the spectral linewidth of the multimode fundamental field is suppressed below the Raman linewidth of Raman crystal BaWO4; hence power in all the longitudinal modes of fundamental field can be extracted by one single Stokes mode. Therefore, the hole-burning free SRS gain exhibits a spectral cleanup effect whereby a stable SLM Stokes field is derived from the multimode fundamental field within a simple standing-wave cavity arrangement. The low-threshold SLM Raman laser delivered 3.42 W SLM Stokes and 1.53 W SLM one-way yellow harmonic at the guide-star wavelength of 589.16 nm. The results here provide a new approach to SLM laser operation with good simplicity and power dynamic range. Further engineering for power scaling and better stability is also discussed.
Several continuous-wave Nd:YVO4 self-Raman lasers based on the primary and secondary Raman transitions of YVO4 (893cm−1 and 379cm−1 respectively) are reported in this paper. Laser outputs were obtained at a wavelength of 1109nm, 1158nm and 1231nm with maximum output powers of 1.0W, 700mW and 540mW respectively. The respective absorbed pump power to Raman output power conversion efficiencies were measured at 8.4%, 5.4%, and 5.4%.
10 October 2012 in Journal of Microelectromechanical Systems
A 1.2-mm-diameter gold-silicon bimorph varifocal micromirror (VFM) has been designed and investigated for imaging applications. Several prototypes have been fabricated in a 10-μm-thick single-crystal silicon-on-insulator material. Controlled variation of the radius of curvature using electrothermal and optothermal actuation has been demonstrated. A finite-element-based simulation of the device behavior has been undertaken. Experimental characterization has shown that the device focusing power varied from an initial 87 dioptre to 69 dioptre by applying dc electrical power of 33 mW and produced a focusing power value of 59 dioptre when optothermally actuated with a normally incident laser beam of 488-nm wavelength and 43 mW. When electrothermally driven, the mechanical rise and fall times of the device were measured as 130 and 120 ms, respectively. Experimental and theoretical analyses using Zernike coefficients show that, throughout the actuation range, the aberration of the VFM is mainly a small defocus term, with negligible higher order aberrations. A compact active imaging system incorporating the VFM has been also demonstrated. This system was capable of focusing several objects located along the optical axis with a maximum tracking range of 134 mm.
A controllable self-Raman laser using an adaptive optics (AO)-based control loop featuring an intracavity deformable mirror is reported. This method has the potential to alleviate thermal lensing within the Raman and laser gain media, and enable solid-state Raman lasers to reach new power levels. A proof-of-concept experiment using a self-Raman laser and resulting in 18% enhancement of the first Stokes output power is reported. Moreover, wavelength selection between two Raman laser outputs ( and 1176 nm) emanating from the 379 and Raman shifts of , respectively, was achieved using this AO technique.
We demonstrate narrowband tunable terahertz generation from a picosecond polariton laser, pumped by a CW mode-locked picosecond laser. We generated up to 5.4 μW of terahertz output in untuned mode. We tuned the terahertz output, using etalons in the cavity, from 0.51 to 2.12 THz. Terahertz output powers of 3.7 μW and 2.4 μW were achieved at terahertz frequencies of 1.6 THz and 0.9 THz, respectively.