20 November 2021 in Journal of Applied Polymer Science
1 January 2020 in IEEE Access
Dimensional variation has significant effect on the quality of product. Recently, Monte Carlo (MC) simulation is widely used in dimensional variation analysis, with high accuracy and adaptability, but there is the problem of low computational efficiency. Aiming to address this problem, an improvement of MC simulation is proposed through a two-phases solution. In the first phase, surrogate model is used to approximate the locating constraint equations for a 3D part, which reduces the nonlinear coupling between dimensional deviations and avoids large-scale solution of nonlinear equations in dimensional variation analysis on the condition of ensuring the accuracy. In the second phase, random samples used in MC simulation are replaced by low discrepancy sequences, which enable the samples to have better homogeneity and representativeness and reduce the number of samples required in the dimensional variation analysis. Finally, two examples are used to demonstrate the effectiveness of the method, and the results show that the two-phases solution has advantages both in the accuracy and efficiency.
20 January 2020 in Textile Research Journal
Problems with knitting needles are one of the main causes of production loss of fabric. In order to detect problems with knitting needles quickly and accurately, this paper proposes a hosiery knitting needle detection system based on machine vision. Meanwhile, according to the working condition of real hosiery knitting needles, a simulated needle cylinder rotary platform is built. The system can detect knitting needle problems, and the needle causing the issue can be identified as the beginning of the fabric defect appears. The production losses caused by the bending and fracture of knitting needles are reduced at the source. In the image processing, the vertical projection algorithm is introduced in the system, and the defect of image binarization is improved. At the same time, the multi-classification support vector machine based on the decision tree is used to realize the image classification. The experimental results show that the classification accuracy of the two levels classifiers in the system can reach 100% and 98%, and the best time of system detection is 0.348 s.
6 June 2022 in Journal of Adhesion Science and Technology
In the rotating parts of large mechanical equipment, the existence of friction and wear will inevitably cause energy consumption and loss. Coating a layer of solid lubricating material on the surface of mechanical equipment is an effective means to reduce friction and wear. In this study, for the first time, a composite film with high mechanical and lubricating properties was prepared by hot-pressing the mixture of graphene oxide (GO), polyethylene glycol (PEG), and polyvinyl alcohol (PVA). Its structure and properties were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Raman spectroscopy (Raman), and thermogravimetric analysis (TGA). The lubrication and tribological properties of GO-PEG-PVA composite film and other single films under different lubrication conditions were analyzed. The lubrication characteristics of GO-PEG-PVA composite film under oil lubrication were discussed in detail. The results show that the surface coating with GO-PEG-PVA can ensure a lower friction coefficient, especially in the condition of oil lubrication, the friction coefficient is 82% lower than that without oil film. The hot pressing process ensures that the surface morphology will not produce large shear deformation. The lubrication mechanism and lubrication model were discussed in detail, and the concept of improving surface lubrication performance by co-lubrication was put forward.
16 March 2006 in The International Journal of Advanced Manufacturing Technology