11 May 2013 in Microsystem Technologies
1 January 2014 in Journal of Micro/Nanolithography, MEMS, and MOEMS
A comparison of dry and wet release methods for surface micromachining of metallic structures, such as RF MEMS switches, test structures, bridges, and cantilevers is presented. The dry release process is optimized by varying the concentration of and plasma and RF power. The plasma ashing of the sacrificial layer typically results in damage to metallic structures or stress-related deformation due to rise in temperature (). A wet release process using critical point drying (CPD) has been investigated to realize gold-electroplated structures with reduced residual stress. The CPD, being a low-temperature (31.1°C) process, is more suitable for compliant structures without any deformation.
4 November 2016 in Journal of Microelectromechanical Systems
In this paper, we present the results of gallium implantation/doping in silicon using focused ion beam (FIB) to realize gallium (Ga) doped piezoresistive pressure sensor. We have performed optimization of various FIB parameters and demonstrated that with this approach, a gauge factors of about 100 and a sheet resistance of 1-2 kQ/square can be achieved using optimized FIB doses in range of 5×10 17 -8×10 18 ion/m 2 . The results open a novel and simple way of fabricating piezoresistors especially on nanoscale structures where lithography can be challenging.