The paper presents analytical methods of the prediction of mechanical properties of welded joints made of S355 steel. Formulas determining so called characteristic temperatures and times for corresponding phase transformations are used in order to build computational CCT diagrams. These empirical relationships are presented in correlation with corresponding cooling rates v8/5(t8/5). Additionally, volume fractions of each phase are determined as a function of cooling rate using analytical models. Mechanical properties of welded joints made of S355 steel are predicted on the basis of obtained phase fractions. Dilatometric research on S355 steel is performed in order to verify obtained analytical results and to evaluate the usefulness of created diagrams of austenite transformation.
The prediction of hardness distribution in the cross section of welded join made of S1100QL steel is performed in this study on the basis of analytical methods. Analytical CCT diagram and volume fraction of each phases of S1100QL steel as a function of cooling time t8/5 are determined. A numerical simulation of welding process is performed in ABAQUS. Thermal cycles and temperature field in welded joints are determined. Prediction of hardness distribution in the cross section of the joint is performed on the basis of obtained cooling times t8/5. Results of numerical simulations are compared with experimentally obtained results.
The numerical analysis of laser welding process with consideration analytical methods determining phase transformations and mechanical properties of welded joints are presents in this paper. The analytical CCT diagram and final structural composition of S355 steel are presented. The empirical relations presents in paper are determined by chemical compositions investigated steel and cooling rate between temperatures 800-500°C (t8/5). Phase composition and mechanical properties each of structures of steel in weld and heat affected zone (HAZ) are determined on the basis of analytical methods. Laser welded flat is used in numerical simulations in ABAQUS. Mathematical modes of volumetric welding source are used in the calculations. Temperature fields, shape and size of melting zone for selected points in the cross-section of the joint are determined on the basis of thermal cycles obtained numerical.