Tomasz Domański

Dr. Tomasz Domański


Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2016 in Procedia Engineering
Verified
Journal Article
Open access
TDTomasz Domański
Tomasz Domański
WPWiesława Piekarska
Wiesława Piekarska
KMKubiak Marcin
Kubiak Marcin
ZSZbigniew Saternus
Zbigniew Saternus
Numerical analysis of thermal treatment processes is an important issue to be considered by contemporary laboratories dealing with industrial designing in general. Phenomena associated with heat treatment are complex and not yet adequately explained. Improvement in this field of numerical solutions is particularly forced by industry which, striving for deployment of state of the art technologies and reduction of costs, is demanding continuous enhancement of tool thermal treatment. Phase transformations, in particular in cooling processes, involve considerable changes in kinetics that are not always associated with external thermal impact. Analyses of experimental data allowed developing many mathematical models to measure volume fractions of phase transformations in solid state. The Johnson-Mehl Avrami equation and generalised Kolmogorov equation are the two primary models applied in almost all tests evaluating transformation of austenite into ferrite, bainite and martensite. In order to calculate the martensitic phase volume fraction, usually the Koistinen-Marburger equation, or any of its modified formulas, are used.

1 January 2017 in Procedia Engineering
Verified
Journal Article
Open access
WPWiesława Piekarska
Wiesława Piekarska
DGDorota Goszczyńska-Króliszewska
Dorota Goszczyńska-Króliszewska
TDTomasz Domański
Tomasz Domański
ABAdam Bokota
Adam Bokota

30 April 2022 in Materials
Verified
Journal Article
Open access
PDF file
TDTomasz Domański
Tomasz Domański
WPWiesława Piekarska
Wiesława Piekarska
ZSZbigniew Saternus
Zbigniew Saternus
KMKubiak Marcin
Kubiak Marcin
SSSebastian Stano
Sebastian Stano
The paper presents a numerical model based on the finite element method (FEM) to predict deformations and residual stresses in socket welding of different diameter stainless steel pipes made of X5CrNi18-10 steel. The next part of the paper concerns the determination of strength properties of a welded joint in terms of a shear test. A thermo-elastic–plastic numerical model is developed using Abaqus FEA software in order to determine the thermal and mechanical phenomena of the welded joint. This approach requires the implementation of moveable heat source power intensity distribution based on circumferentially moving Goldak’s heat source model. This model is implemented in the additional DFLUX subroutine, written in Fortran programming language. The correctness of the assumed model of thermal phenomena is confirmed by examinations of the shape and size of the melted zone. The strength of the welded joint subjected to shear is verified by performing a compression test of welded pipes as well as computer simulations with validation of the computational model using the Dantec 3D image correlation system.

14 September 2021 in Materials
Verified
Journal Article
Open access
PDF file
ZSZbigniew Saternus
Zbigniew Saternus
WPWiesława Piekarska
Wiesława Piekarska
KMKubiak Marcin
Kubiak Marcin
TDTomasz Domański
Tomasz Domański
The paper concerns the numerical analysis of the influence for three different of welding heat source inclinations on the weld pool shape and mechanical properties of the resulting joint. Numerical analysis is based on the experimental tests of single-side welding of two sheets made of X5CrNi18-10 stainless steel. The joint is made using a laser welding heat source. Experimental test was performed for one heating source inclination. As a part of the work metallographic tests are performed on which the quality of obtained joints are determined. Numerical calculations are executed in Abaqus FEA. The same geometrical model is assumed as in the experiment. Material model takes into account changing with temperature thermophysical properties of austenitic steel. Modeling of the motion of heating source is performed in additional subroutine. The welding source parameters are assumed in accordance with the welding process parameters. Numerical calculations were performed for three different inclinations of the source. One inclination is consistent with experimental studies. The performed numerical calculations allowed to determine the temperature field, shape of welding pool as well as deformations and stress state in welded joint. The obtained results are compared to results of the experiment.

15 May 2024 in Materials
Verified
Journal Article
Open access
PDF file
KMKubiak Marcin
Kubiak Marcin
ZSZbigniew Saternus
Zbigniew Saternus
TDTomasz Domański
Tomasz Domański
WPWiesława Piekarska
Wiesława Piekarska
This paper focuses on the mathematical and numerical modeling of the electric arc + laser beam welding (HLAW) process using an innovative model of the Yb:YAG laser heat source. Laser energy distribution is measured experimentally using a UFF100 analyzer. The results of experimental research, including the beam profile and energetic characteristics of an electric arc, are used in the model. The laser beam description is based on geostatistical kriging interpolation, whereas the electric arc is modeled using Goldak’s distribution. Hybrid heat source models are used in numerical algorithms to analyze physical phenomena occurring in the laser–arc hybrid welding process. Thermal phenomena with fluid flow in the fusion zone (FZ) are described by continuum conservation equations. The kinetics of phase transformations in the solid state are determined using Johnson–Mehl–Avrami (JMA) and Koistinen–Marburger (KM) equations. A continuous cooling transformation (CCT) diagram is determined using interpolation functions and experimental research. An experimental dilatometric analysis for the chosen cooling rates is performed to define the start and final temperatures as well as the start and final times of phase transformations. Computer simulations of butt-welding of S355 steel are executed to describe temperature and melted material velocity profiles. The predicted FZ and heat-affected zone (HAZ) are compared to cross-sections of hybrid welded joints, performed using different laser beam focusing. The obtained results confirm the significant influence of the power distribution of the heat source and the laser beam focusing point on the temperature distribution and the characteristic zones of the joint.

14 March 2018 in MATEC Web of Conferences
Verified
Journal Article
Open access
TDTomasz Domański
Tomasz Domański
WPWiesława Piekarska
Wiesława Piekarska
MKMarcin Kubiak
Marcin Kubiak
ZSZbigniew Saternus
Zbigniew Saternus
DGDorota Goszczyńska-Króliszewska
Dorota Goszczyńska-Króliszewska
The paper concerns numerical simulations of progressive hardening include phase transformations in solid state of steel. Abaqus FEA software is used for numerical analysis of temperature field and phase transformations. Numerical subroutines, written in fortran programming language are used in computer simulations where models of the distribution of movable heat source, kinetics of phase transformations in solid state as well as thermal and structural strain are implemented. Model for evaluation of fractions of phases and their kinetics is based on continuous heating diagram and continuous cooling diagram. The numerical analysis of thermal fields, phase fractions and strain associated progressive hardening of elements made of steel were done.