Mechanical interlocking has been proven to be an effective bonding mechanism for dissimilar material groups like polymers and metals. Therefore, this contribution assesses several surface pretreatments for the metallic adherent. Blasting, etching, combined blasting and etching, thermal spraying, and laser structuring processes are investigated with regard to the achievable interlaminar strength and the corresponding surface roughness parameters. The experiments are carried out on EN AW-6082/polyamide 6 polymer-metal-hybrids, utilizing a novel butt-bonded hollow cylinder specimen geometry for determining the shear and tensile strength. The experimental results indicate that the surface roughness slope has a major impact on the interlaminar strength. A laser-generated pin structure is found to provide the best mechanical performance as well as the highest surface slope of all investigated structuring methods.
23 May 2022 in The International Journal of Advanced Manufacturing Technology
Pulsed electrochemical machining offers great potential to meet growing demands on components like miniaturization, efficiency, and functionalization. Current research activities show that the electrochemical process can be influenced by a superimposed magnetic field. While the effects of most process parameters such as pulse regimes, flow conditions, and cathode material selection are well understood, the influence of magnetic fields is still difficult to estimate for a targeted process design. Obtaining a better understanding of the magnetic field–assisted electrochemical machining process and achieving a foundation for later process simulations are the objectives of the present work where we focus on the influence of the Lorentz force in a NaNO3-electrolyte. Therefore, an experimental setup was designed in which the magnetic field is arranged perpendicular to the electric field. To reduce the influence of the electrochemical reaction on the electrolyte flow field, a large distance between the stainless-steel electrodes was chosen. The resulting flow in the initially resting fluid is mainly induced by the Lorentz force. This electrolyte flow is studied by particle image velocimetry and is modelled by magnetohydrodynamic and multiphase simulations. Based on the experimental results, the simulations are validated. In the future, the simulation approach will be pursued, e.g., for the electrochemical machining with pulsed electric current and oscillating cathode.
The interlaminar strength of mechanically interlocked polymer–metal interfaces is strongly dependent on the surface structure of the metal component. Therefore, this contribution assesses the suitability of the fractal dimension for quantification of the surface structure, as well as interlaminar strength prediction of aluminum/polyamide 6 polymer–metal hybrids. Seven different surface structures, manufactured by mechanical blasting, combined mechanical blasting and etching, thermal spraying, and laser ablation, are investigated. The experiments are carried out on a butt-bonded hollow cylinder testing method that allows shear and tensile strength determination with one specific specimen geometry. The fractal dimension of the metal surfaces is derived from cross-sectional images. For comparison, the surface roughness slope is determined and related to the interlaminar strength. Finally, a fracture analysis is conducted. For the investigated material combination, the experimental results indicate that the fractal dimension is an appropriate measure for predicting the interlaminar strength.
Laser structuring is by far the most investigated metal surface-pretreatment method for creating adhesion in polymer–metal hybrids. Especially, cone-like protrusions show excellent wetting behaviour as well as high compound strength. However, the processing time is extremely high. Therefore, this paper assesses a process strategy for creating pin structures with scalable height by single pulse drilling with an Nd/YVO4 nanosecond laser system on EN AW-6082 aluminium alloy. The strength testing is carried out by butt-bonded hollow cylinder torsion. The samples are manufactured by heat-conduction thermal joining with polyamide 6. Ten different surface structures with two different ablation diameters are investigated and compared to cone-like protrusions in terms of processing time, wetting behaviour, shear strength and fracture behaviour. The experimental results show that pulse drilling pins structures with high aspect ratio reach-strength values close to cone-like protrusions but with 31 times higher processing rate.
Electrochemical machining (ECM) is a method for removing metal by anodic dissolution. At the interface between the workpiece surface and an electrically conductive fluid (electrolyte), the material is dissolved locally without direct physical contact to the cathodic tool. Due to the force‐free nature of the process, ECM is used for machining high‐strength or hard materials, such as titanium aluminides, Inconel, Waspaloy, and high nickel, cobalt, and rhenium alloys. However, determining suitable process parameters remains challenging due to their interacting effects on working distances during the machining process. Therefore a simulation‐based approach to process design substantially reduces resource and time investment to achieve the desired geometry of the finished part. This methodology requires data about the materials electrochemical properties, such as removal velocity and current efficiency, which have to be obtained experimentally. In this study, a methodology for acquiring and processing this data as well as the development of multiphysics simulation models is presented exemplarily for manufacturing a centrifugal impeller with a diameter of 14 mm consisting of the nickel alloy Inconel 713C for use in turbomachinery.