19 December 2015 in Carpathian Mathematical Publications
Let $A\in(-\infty,+\infty]$ and $\Phi$ be a continuously on $[\sigma_0,A)$ function such that $\Phi(\sigma)\to+\infty$ as $\sigma\to A-0$. We establish a necessary and sufficient condition on a nonnegative sequence $\lambda=(\lambda_n)$, increasing to $+\infty$, under which the equality$$\overline{\lim\limits_{\sigma\uparrow A}}\frac{\ln M(\sigma,F)}{\Phi(\sigma)}=\overline{\lim\limits_{\sigma\uparrow A}}\frac{\ln\mu(\sigma,F)}{\Phi(\sigma)},$$holds for every Dirichlet series of the form $F(s)=\sum_{n=0}^\infty a_ne^{s\lambda_n}$, $s=\sigma+it$, absolutely convergent in the half-plane ${Re}\, s
1 November 2015 in Ukrainian Mathematical Journal
28 May 2019 in Military Technical Collection
Дослідження напружено-деформованого стану циліндричних елементів інженерних споруд спеціального призначення за дії температурного навантаження
21 December 2021 in Military Technical Collection
Tanks for the storage of oil products and toxic substances in warehouses are the main ones. They can be in the form of separate tanks or a group of tanks. The most widespread are vertical steel tanks with a stationary roof that a placed in open areas. The tanks heat up, and the intensity of evaporation of the oil product increases in case of fire. If there is a permanent roof, the pressure in the tank will increase. If the capacity of the breathing valves is less than the intensity of evaporation then there is a risk of explosion. Explosions in the tank often lead to the separation of the bottom, and the side cylindrical surface and the roof fly away instantly, spilling oil on neighboring tanks and the territory of the tank’s park. Then the combustion area increases intensively. The destruction of the integrity of the tank, due to the separation of the bottom, contributes to temperature and power stresses, the value of which increases with increasing temperature of their heating and increasing pressure, respectively. The values of temperature stresses are added to the power stresses caused by pressure, and when the critical value is reached, destruction occurs. In the article by the method of mathematical modeling using the laws of thermodynamics and mechanics of liquids and gases, analytical dependences for research of parameters of leakage of toxic substances and gases at action of high pressure from capacities at their storage are received. Saint-Venant’s principle was used to model the gas flow rate process. The dependence of the duration of gas leakage from special purpose tanks at the change of the area of the emergency hole and the pressure drop is obtained. The obtained results allow determining the velocity and mass flow rate of the gas depending on the area of the hole, the time flow, and the difference of pressure. Therefore, the task of research the emergency situations of engineering cylindrical tanks under the influence of temperature and pressure, which leads to the spillage of toxic substances and gassiness is actual. The researches results are presented graphically.
20 May 2021 in Military Technical Collection
Tanks for the storage of oil products and toxic substances in warehouses are the main ones. They can be in the form of separate tanks or a group of tanks. The most widespread are vertical steel tanks with a stationary roof that a placed in open areas. The tanks heat up, and the intensity of evaporation of the oil product increases in case of fire. If there is a permanent roof, the pressure in the tank will increase. If the capacity of the breathing valves is less than the intensity of evaporation then there is a risk of explosion. Explosions in the tank often lead to the separation of the bottom, and the side cylindrical surface and the roof fly away instantly, spilling oil on neighboring tanks and the territory of the tank’s park. Then the combustion area increases intensively. The destruction of the integrity of the tank, due to the separation of the bottom, contributes to temperature and power stresses, the value of which increases with increasing temperature of their heating and increasing pressure, respectively. The values of temperature stresses are added to the power stresses caused by pressure, and when the critical value is reached, destruction occurs. We investigated the stress-strain state of a steel vertical tank for the storage of oil products and toxic substances. The analysis of the reasons for the occurrence of admissible pressure in the tank, which is the reason for the loss of its integrity, is carried out. Using the differential equation of a closed cylindrical shell, which is under the action of internal pressure, analytical expressions are obtained to find deformations and stresses in the side cylindrical surface and bottom. Were calculated axial and annular stresses for the tank of RVS-900. Based on the basic relations of the theory of elasticity of thin plates and shells analytical expressions of the stress-strain state of the cylindrical tanks are obtained for conditions for changing of pressure on their structural elements. It is shown that the greatest values of axial stresses are obtained on the surface of the connection of the cylindrical surface with the bottom. The researches results are presented graphically.
23 June 2022 in Military Technical Collection
У роботі, використовуючи метод математичного моделювання, а також закони термодинаміки, одержано аналітичні залежності для дослідження напружено-деформованого стану сферичних резервуарів в залежності від різних температур поверхні цієї конструкції. Проведені розрахунки показали, що радіальні напруження є незначними у порівнянні з тангенціальними, які діють на розтяг. Найбільше абсолютне значення тангенціальні напруження приймають на внутрішній поверхні сферичної конструкції, які діють на розтяг та на зовнішній – стиск. Результати досліджень представлені графічно.