17 May 2018 in Journal of Physics D: Applied Physics
In order to study the characteristics of electrothermal plasma interaction with energetic materials, especially the ignition ability, a novel model considering polyethylene and copper ablation is developed, and an ignition experiment system is set up. The parameters of the plasma and the surface conditions of the energetic materials are measured in the testing. The results show the measured first peak pressure to be ~2.2 MPa, the second peak pressure to be ~3.9 MPa, and the visible flame velocity to be ~2000 m s −1 . Circular pits of the order of microns and nanometers in size are observed on the surface of the energetic materials. Further, the parameters of the plasma, including static pressure, total pressure, density, temperature, velocity, copper concentration and PE concentration, are calculated and analyzed by the established model, under discharge currents of 9 kA. The simulation is similar to those of experimental results. A shock wave is observed in the experiment and is presented in the calculations; it plays an important role in the performance of the plasma in the nozzle region, where the parameters of the plasma variation trends are very complex. With the aim of obtaining the overall performance of the plasma, the coupling characteristics of multiple parameters must be taken into account, in accordance with the developed electrothermal plasma model.
1 January 2020 in AIP Advances
The breakdown characteristics of a trigatron spark gap triggered by a plasma jet are studied in this paper; the development of a plasma jet and the influence of the gap distance, working coefficient, and plasma jet ejection properties on breakdown characteristics are compared. The results show that the plasma jet ejecting process can be divided into expanding, steady, and dissipating phases. The electric field distortion induced by the plasma jet is different during the expanding and dissipating phase, in which the plasma jet length increases and the radius of the curvature of the plasma jet front decreases, respectively. As the two processes have different variation rates, a faster increasing rate of the breakdown delay can be obtained during the dissipating phase. A detailed physical mode that explains the effects on the triggered breakdown process is presented. The shape of a plasma jet induced by polyethylene and ceramic surface discharge changes to a great extent during the dissipating phase; a more stable plasma jet can be obtained when induced only by polyethylene, resulting in a smaller breakdown delay under a low working coefficient. The ultraviolet radiation (UV) generated by the plasma jet is effective in reducing the critical breakdown electric field, while the electric field distortion induced by the plasma jet is the main reason behind the triggered breakdown under different working coefficients; the UV could play a limited role in the triggered breakdown process.
1 February 2020 in Physics of Plasmas
This paper presents experimental results on a trigatron spark gap breakdown process induced by different densities of the injected plasma. The results show that the shape of the injected plasma has a great influence on the electric field distribution. The decrease in the curvature radius of the injected plasma front can induce a breakdown during the dissipation of the injected plasma. This process is significant in explaining the sharp increase in the breakdown delay and jitter observed under very low working coefficients. The inception and propagation of the streamer are studied in detail. Due to the high intensity illumination, direct ionization between the injected plasma front and the head of the streamer can occur during the propagation of the streamer. This differs from the conventional streamer breakdown process under a uniform electric field. An explanation of the streamer inception and the direct ionization between the front of the injected plasma and the streamer head is presented. Using the Meek criterion, the effects of electric field distortion and photoionization induced by the injected plasma are analyzed. The results indicate that the effect of the photoionization changes significantly with the density and duration of the plasma injection. Combining this effect with the electric field distortion, a breakdown can occur under a very low working coefficient.
1 October 2018 in Physics of Plasmas
The capillary geometry of discharge plasma sources determines the performance of capillary plasma generators. In this research, 16 types of generators with different geometric sizes and aspect ratios (the length divided by the diameter of the capillary, ranging from 0.67 to 22) were designed. Plasma parameters, including the temperature, static pressure, and velocity, were calculated and analyzed. The results show that the maximum temperature of the plasma decreased with increasing capillary aspect ratios. However, there was a difference between the temperature distributions above and below an aspect ratio threshold of 8.67. The simulations suggest that the aspect ratio threshold of the static pressure for generating shock waves is 15.33. For aspect ratios lower than this value, the maximum static pressure increased with increases in the aspect ratio. Otherwise, a shock wave would be generated, and the distribution of the static pressure would be consistent with distribution 2 (with a shock wave near the nozzle). The maximum velocity decreased as the capillary aspect ratios increased, with a threshold of 8.67. Since the plasma parameters were exponential functions of the aspect ratios, distribution and variation trends of the plasma parameters for different aspect ratios are proposed. These can be used to adjust the electrothermal plasma parameters and to design plasma generators.
3 March 2018 in Frontiers of Mathematics in China
18 June 2019 in Journal of Physics D: Applied Physics
Plasma ignition technology has been widely used for decades due to its great improvement in enhanced burning rate. However, the interaction process between the plasma jet and the solid propellant is still far from being elucidated. In this paper, coupling the flow model of plasma jet and the chemical reaction model of propellants, a more comprehensive model for predicting the plasma enhanced burning rate is presented. Three types of energetic thermoplastic elastomers propellant are involved. In addition, the closed bomb vessel test is conducted to investigate the burning characteristics of propellant under the action of plasma for comparison. It demonstrates that the enhanced combustion phenomenon of propellants in the experiment can be well described by an enhanced burning rate coefficient epsilon calculated with the model, which could reflect the effect of plasma jet to some extent. The results show that the composition of the energetic material and its surface temperature are the key factors influencing the plasma-enhanced combustion. This model would bring some insight on the interaction mechanisms between plasma and different propellants.