Arafat Kabir

Arafat Kabir

Auto-generated profile, based on publicly available information

Arafat Kabir

Department of Electrical Engineering and Computer Science University of Arkansas

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 March 2021 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Open access
AKArafat Kabir
Arafat Kabir
YPYarui Peng
Yarui Peng
With the increasing popularity and applications of 2.5-D integration, both chip and packaging industries are making significant progress in this direction. In advanced high-density 2.5-D packages, package redistribution layers become similar to chiplet back-end-of-line routing layers, and the gap between them scales down with pin density improvement. Chiplet-package interactions become significant and severely affect system performance and reliability. Moreover, 2.5-D integration offers opportunities to apply novel design techniques. The traditional die-by-die design approach neither carefully considers these interactions nor fully exploits the cross-boundary design opportunities. In this article, we present a holistic chiplet-package co-optimization flow for high-density 2.5-D packaging technologies with little performance overhead and zero pipeline-depth increase. Our holistic extraction can capture all parasitics from chiplets and the package and improve system performance through iterative optimizations. Both drop-in and pay-as-you-use design methodologies are implemented for agile development and quick turn-around time. To prove the effectiveness of our flow, we implement several design cases of a microcontroller system in TSMC 65-nm technology. Our design methodologies can reduce the performance gap by 85% with respect to the 2-D reference design after holistic optimizations. We demonstrate design flexibility and development cost-saving by presenting several flavors of a three chiplets system. To validate our flow in silicon, we tape-out a chip in TSMC 65-nm technology with measured data and validated functionality.

22 June 2021
Verified
Conference Paper
Open access
AKArafat Kabir
Arafat Kabir
DPDusan Petranovic
Dusan Petranovic
YPYarui Peng
Yarui Peng
With the popularity of 2.5D integration, an increasing number of chiplets are integrated into advanced system-in-package designs. In such systems, redistribution layer (RDL) wires become longer and denser, with a growing impact on system performance. However, RDL inductive impacts in timing analysis are ignored by the traditional CAD tools. This paper presents our chiplet-package co-optimization flow, which can capture the RDL inductance impact on system performance and automatically adjust the IO drivers to compensate for the inductance overhead. We develop our extraction and timing analysis tool that models RDL wire inductive timing impact on 2.5D system performance within +/-1% error. Our study shows 35% signal paths through RDL violate the timing requirement because of the inductive impact, and remain undetected through only RC-based STA.

11 February 2026 in ACM Transactions on Design Automation of Electronic Systems
Verified
Journal Article
Open access
ZZZhen Zhuang
Zhen Zhuang
WHWeishiun Hung
Weishiun Hung
AKArafat Kabir
Arafat Kabir
YPYarui Peng
Yarui Peng
THTsung-Yi Ho
Tsung-Yi Ho
2.5D packaging has become a popular alternative to integrate advanced logic and memory chiplets for high-performance computing and artificial intelligence systems. In the conventional design flow, chiplets and packages are independently designed and then integrated at the assembly stage. To bridge the gap between chiplet designs and package designs, existing chiplet-package co-design methods iteratively optimize chiplet layouts to improve the performance of the entire system. However, Redistribution Layer (RDL) routing, which finishes the interconnections between chiplets at the package level and significantly affects the system performance, is neglected in the existing co-design flows. Therefore, this article proposes an effective chiplet-package co-design flow focusing on the RDL routing to optimize the package system performance dynamically. The proposed co-design flow can fill in the missing link, package-level co-optimization, of previous design flows. In the proposed co-design flow, we propose an efficient RDL routing algorithm to iteratively optimize the substrate layout based on the cross-boundary timing context extracted from both chiplets and the package. The proposed RDL routing algorithm has two critical techniques, including (1) a Maximal Independent Set-based (MIS-based) pin assignment method to dynamically optimize the pin positions of nets and (2) a network-flow-based router to generate routing layouts. Experimental results show that the proposed design flow can gradually improve the maximum frequency of a real design to the target performance, 400 MHz.

10 October 2024 in arXiv
Verified
Preprint
Open access
PDF file
AKArafat Kabir
Arafat Kabir
TKTendayi Kamucheka
Tendayi Kamucheka
NFNathaniel Fredricks
Nathaniel Fredricks
JMJoel Mandebi
Joel Mandebi
Jason BakosJason Bakos
Jason Bakos
DADavid Andrews
David Andrews
Many recent FPGA-based Processor-in-Memory (PIM) architectures have appeared with promises of impressive levels of parallelism but with performance that falls short of expectations due to reduced maximum clock frequencies, an inability to scale processing elements up to the maximum BRAM capacity, and minimal hardware support for large reduction operations. In this paper, we first establish what we believe should be a "Gold Standard" set of design objectives for PIM-based FPGA designs. This Gold Standard was established to serve as an absolute metric for comparing PIMs developed on different technology nodes and vendor families as well as an aspirational goal for designers. We then present IMAGine, an In-Memory Accelerated GEMV engine used as a case study to show the Gold Standard can be realized in practice. IMAGine serves as an existence proof that dispels several myths surrounding what is normally accepted as clocking and scaling FPGA performance limitations. Specifically, IMAGine clocks at the maximum frequency of the BRAM and scales to 100% of the available BRAMs. Comparative analyses are presented showing execution speeds over existing PIM-based GEMV engines on FPGAs and achieving a 2.65x - 3.2x faster clock. An AMD Alveo U55 implementation is presented that achieves a system clock speed of 737 MHz, providing 64K bit-serial multiply-accumulate (MAC) units for GEMV operation. This establishes IMAGine as the fastest PIM-based GEMV overlay, outperforming even the custom PIM-based FPGA accelerators reported to date. Additionally, it surpasses TPU v1-v2 and Alibaba Hanguang 800 in clock speed while offering an equal or greater number of MAC units.

6 October 2024 in arXiv
Verified
Preprint
Open access
PDF file
AKArafat Kabir
Arafat Kabir
TKTendayi Kamucheka
Tendayi Kamucheka
NFNathaniel Fredricks
Nathaniel Fredricks
JMJoel Mandebi
Joel Mandebi
Jason BakosJason Bakos
Jason Bakos
DADavid Andrews
David Andrews
Processor-in-Memory (PIM) overlays and new redesigned reconfigurable tile fabrics have been proposed to eliminate the von Neumann bottleneck and enable processing performance to scale with BRAM capacity. The performance of these FPGA-based PIM architectures has been limited due to a reduction of the BRAMs maximum clock frequencies and less than ideal scaling of processing elements with increased BRAM capacity. This paper presents IMAGine, an In-Memory Accelerated GEMV engine, a PIM-array accelerator that clocks at the maximum frequency of the BRAM and scales to 100% of the available BRAMs. Comparative analyses are presented showing execution speeds over existing PIM-based GEMV engines on FPGAs and achieving a 2.65x - 3.2x faster clock. An AMD Alveo U55 implementation is presented that achieves a system clock speed of 737 MHz, providing 64K bit-serial multiply-accumulate (MAC) units for GEMV operation. This establishes IMAGine as the fastest PIM-based GEMV overlay, outperforming even the custom PIM-based FPGA accelerators reported to date. Additionally, it surpasses TPU v1-v2 and Alibaba Hanguang 800 in clock speed while offering an equal or greater number of MAC units.

21 November 2025 in ACM Transactions on Reconfigurable Technology and Systems
Verified
Journal Article
Open access
AKArafat Kabir
Arafat Kabir
NFNathaniel Fredricks
Nathaniel Fredricks
TKTendayi Kamucheka
Tendayi Kamucheka
JMJoel Mandebi
Joel Mandebi
MHMiaoqing Huang
Miaoqing Huang
DADavid Andrews
David Andrews
The matrix operations that underpin today’s deep learning models are routinely implemented in Single Instruction Multiple Data (SIMD) domain specific accelerators. SIMD accelerators including GPUs and array processors can effectively leverage parallelism in models that are compute-bound, but their effectiveness can be diminished for models that are memory-bound. Processing-in-Memory (PIM) architectures are being explored to provide better energy efficiency and scalable performance for these memory-bound models. Modern Field Programmable Gate Arrays (FPGAs) feature hundreds of megabits of Static Random Access Memory (SRAM) distributed across the device as disaggregated memory resources. This makes FPGAs ideal programmable platforms for developing custom Processor In/Near Memory accelerators. Several PIM array-based accelerator designs have been proposed to leverage this substantial internal bandwidth. However, results reported to date show the FPGA based PIM architectures operating at system clock frequencies well below a chips Block-RAM (BRAM) Fmax clock frequency. Results also show that the compute densities of the designs do not scale linearly with BRAM densities. These results indicate that FPGA PIM architectures will never be competitive with their custom Application-Specific Integrated Circuit (ASIC) counterparts. In this article, we introduce DA-VinCi, a D eep-Learning A ccelerator O v erlay using In -Memory C omput i ng. DA-VinCi is the first scalable FPGA based PIM deep-learning accelerator overlay capable of clocking at the maximum frequency of a device’s BRAM. Further, the architecture of DA-VinCi allows the number of compute units to scale linearly up to the maximum capacity of a devices BRAM, and at the maximum clock frequency of the BRAM. The DA-VinCi overlay has a programmable Instruction Set Architecture (ISA) that allows the same synthesized design to provide low-latency inferencing of a range of memory-bound deep-learning models, including Multilayer Perceptrons, Recurrent Neural Network, Long Short-Term Memory, and Gated Recurrent Unit networks. The scalability and high clocking frequency of DA-VinCi is achieved through a new Processor In Memory (PIM) tile architecture and a highly scalable system-level framework. We present results showing DA-VinCi linearly scaling the number of Processing Elements (PEs) to 100% of the BRAM capacity (over 60K PEs) on an Alveo U55 clocking at 737 MHz, the chips BRAM Fmax. We provide comparative studies on inference latency across multiple deep-learning applications that show DA-VinCi achieves up to a 201 \(\times\) improvement over a state-of-the-art PIM overlay accelerator, up to 87 \(\times\) improvement over existing PIM-based FPGA accelerators, and up to 57 \(\times\) improvement over custom deep-learning accelerators on FPGAs.