3D digital surveying and modelling of cave geometry represents a relevant approach for research, management and preservation of our cultural and geological legacy. In this paper, a multi-sensor approach based on a terrestrial laser scanner, a high-resolution digital camera and a total station is presented. Two emblematic caves of Paleolithic human occupation and situated in northern Spain, “Las Caldas” and “Peña de Candamo”, have been chosen to put in practise this approach. As a result, an integral and multi-scalable 3D model is generated which may allow other scientists, pre-historians, geologists…, to work on two different levels, integrating different Paleolithic Art datasets: (1) a basic level based on the accurate and metric support provided by the laser scanner; and (2) a advanced level using the range and image-based modelling.
This paper presents a radiometric study to recognize pathologies in façades of historical buildings by using two different remote sensing technologies covering part of the visible and very near infrared spectrum (530–905 nm). Building materials deteriorate over the years due to different extrinsic and intrinsic agents, so assessing these affections in a non-invasive way is crucial to help preserve them since in many cases they are valuable and some have been declared monuments of cultural interest. For the investigation, passive and active remote acquisition systems were applied operating at different wavelengths. A 6-band Mini-MCA multispectral camera (530–801 nm) and a FARO Focus3D terrestrial laser scanner (905 nm) were used with the dual purpose of detecting different materials and damages on building façades as well as determining which acquisition system and spectral range is more suitable for this kind of studies. The laser scan points were used as base to create orthoimages, the input of the two different classification processes performed. The set of all orthoimages from both sensors was classified under supervision. Furthermore, orthoimages from each individual sensor were automatically classified to compare results from each sensor with the reference supervised classification. Higher overall accuracy with the FARO Focus3D, 74.39%, was obtained with respect to the Mini MCA6, 66.04%. Finally, after applying the radiometric calibration, a minimum improvement of 24% in the image classification results was obtained in terms of overall accuracy.
23 October 2008 in Nondestructive Testing and Evaluation
This paper deals with the application of terrestrial laser scanner technology to the health monitoring of a monument in the World Heritage List. Specifically, this monument is a mediaeval wall located in Avila, Spain. The main aim of the paper is to show the relevance and novelty offered by the laser scanning methodology developed, which incorporates different statistical and modelling approaches not considered until now. In addition, the methods proposed in this paper together with the obtained results allow the measurement of entire structures or deformed shapes in buildings. The accuracy of our methodology compared to surveying methods proved satisfactory. Thus, they have been useful not only to show its viability but also to secure and maintain the safety and serviceability of this emblematic monument.
This paper deals with the application of a non-destructive technique, terrestrial laser scanner, for the recording and modeling of rock art at caves. Two emblematic paleolithic caves have been tested using this technology: dasiaLas Caldaspsila cave, declared Good of Cultural Interest in the 70psilas and nowadays, Protected Natural Area; and dasiaPentildea de Candamopsila cave, declared National Monument from the XXth century beginnings. Both caves share the same geographical context, the north of Spain (Asturias region), and belong to the most brilliant Upper Paleolithic period: Middle Magdalenian (ca. 14,000 BP). As a result, a metric laser model is generated which allow to the prehistorian works in three different levels, integrating different datasets belong to paleolithic art. From a basic level based on a metric 3D support with points cloud and polygonal models to a digital archiving of rock art at caves and even the development of virtual and interactive environments.
18 February 2015 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
This paper presents a comparative study with different remote sensing technologies to recognize pathologies in façades of historical buildings. Building materials deteriorate over the years due to different extrinsic and intrinsic agents, so assessing these diseases in a non-invasive way is crucial to help preserve them. Most of these buildings are extremely valuable and some of them have been declared monuments of cultural interest. In this way through close range remote sensing techniques, it is possible to study material pathologies in a rigorous way and in a short duration field campaign. For the investigation two different acquisition systems were applied, active and passive methods. The terrestrial laser scanner FARO Focus 3D was used as active sensor, working at the wavelength of 905 nm. For the case of passive sensors, a Nikon D-5000 and a 6- bands Mini-MCA multispectral camera (530-801 nm) were applied covering visible and near infrared spectral range. This analysis allows assessing the sensor, or sensors combination, suitability for pathologies detection, addressing the limitations according to the spatial and spectral resolution. Moreover, the pathology detection by unsupervised classification methods is addressed in order to evaluate the automation capability of this process.