The power conversion efficiency (PCE) of a dye-sensitized solar cell (DSSC) device depends on its semiconductor characteristics. Titanium dioxide (TiO2) nanoparticles are a semiconductor material commonly used in the DSSC device whose characteristics depend on the synthesis process. There are many routes to synthesize TiO2, however, they typically involve hazardous approaches, which may cause risk to the environment. Green synthesis is an environmentally friendly alternative method using ecological solvents that eliminates toxic waste and reduces energy consumption. In this work, tropical almond (Terminalia catappa L.) was used as a natural capping agent in the green synthesis to control the growth of TiO2. In addition, graphene oxide (GO) was used as a dopant to increase the performance of DSSC device. The results are convincing, in which the addition of 0.0017 % GO doping in tropical almond extract mediated green synthesis of TiO2 improved the PCE from 0.85 % to 1.72 %. These results suggest that GO-modified TiO2 nanoparticles green synthesized using tropical almond extract have great potential in the fabrication of DSSC devices with good PCE, low cost, and low environmental impact.
24 August 2024 in Chemical Engineering Journal Advances
In this work, titanium dioxide nanoparticles (TiO₂ NPs) were green-synthesized using jasmine (Jasminum sambac) flower extracts as the medium with different solvent variation concentrations. The green synthesis was carried out using titanium isopropoxide (TTIP) as a precursor via the sol-gel method. The obtained TiO₂ NPs were characterized using infrared spectroscopy (FTIR), ultraviolet spectroscopy (UV-DRS), X-ray diffraction (XRD), field emission scanning electron microscopy/energy dispersive X-ray spectroscopy (FESEM/EDX), Raman spectroscopy, and high-resolution transmission electron microscopy/selected area diffraction (HRTEM/SAED). The characterization revealed that the green-synthesized TiO₂ NPs possess a pure tetragonal anatase phase, which belongs to the space group I41/amd. Dye-sensitized solar cell devices were further fabricated using the obtained TiO₂ NPs and sensitized with the commercial dye N719 and a kesumba (Bixa orellana) seed extract as an alternative, inexpensive, yet sustainable natural dye. The highest efficiency of 2.52% was obtained from TiO₂ NPs sensitized using commercial dye N719 and synthesized using jasmine flower extract containing 30% acetylacetone, followed by one containing 50% acetylacetone, which is higher than that of commercial TiO₂ (0.80%). The same materials sensitized using kesumba seed extract resulted in efficiency of 0.22%, 0.08%, and 1.22%, respectively. These findings offer insight and pave the way for more novel, environmentally friendly methods for developing green-synthesizing nanomaterials and natural dye derivatives, ultimately contributing to a sustainable future.
The increasing number of bone fracture incident in Indonesia from year to year needs an urgent problem solving of the limited bone substitute which can meet the necessary criteria for that purpose. Motivated by this, therefore, the current study is focusing on the optimization of material properties used as bone scaffold. A biomaterial of polyvinyl alcohol (PVA)/chitosan-hydroxyapatite (HA) composite was successfully made by wet chemistry method, followed by freeze thawing and freeze drying. For comparison purposes, the percentage of HA has been varied from 0, 25 and 40 % (wt/v). The resulting composites were characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscope (SEM), compressive test, and swelling behavior. The results showed that the addition of HA up to 40% (wt/v) has yielded a porous structure with an average pore size of 42.39 µm. In addition, the compressive modulus was enhanced from 14 MPa for 0% HA to 143, and 191 MPa for composites with the addition of HA from 25 to 40% (wt/v). The addition of HA has also reduced the swelling ratio from 296% for the sample without HA to 85 and 78 % for sample with addition of HA from 25 to 40 (wt/v), respectively. The obtained results show that PVA/chitosan-HA in this study is potential to be used as scaffold in bone tissue engineering.