12 April 2021 in Eastern-European Journal of Enterprise Technologies
This work covers the effectiveness of the White tea extract as a green corrosion inhibitor and is correlated to the strength and stability bonding between the phenolic molecule and the Fe atoms in mild steel and how this interaction can be studied by altering the concentration and temperature. White tea has received considerable attention due to its capability as a corrosion inhibitor and has been extensively studied using electrochemical techniques. However, accurate and systematic functional group identification and surface modification have been missing. Our study sought to demonstrate the quantitative measurement of electrochemical impedance spectroscopy (EIS) complemented by the FTIR (Fourier transform infrared spectroscopy), Total Phenolic Test, and Raman Spectroscopy. The SEM (Scanning Electronic Microscope)/EDX (Energy-Dispersive X-Ray Spectroscopy), and AFM (Atomic Force Microscope) were used to study the surface modification. The EIS results show that the optimum inhibition efficiency was 96 % in a solution of 80 ppm at 60 °C. Acetone 70 % was used to extract White tea and gives 14.17±0.25 % phenolic compound. Spectroscopic studies show -OH, Aromatic C=C, C=O and C-O-C become major contributors in the adsorption process and are found on the surface of metals as corrosion protection. Meanwhile, the thermodynamic calculation shows the White tea was adsorbed chemically. The nearness of R2 to 1 shows the adsorption agrees with the Langmuir adsorption isotherm. Eventually, the surface modification revealed that phenol molecules are responsible to reduce the corrosion rate at 16.38×10-3 mpy. Our results are expected to provide a guideline for future research in White tea as a green corrosion inhibitor
10 July 2019 in International Journal of Energy Research
26 December 2017 in International Journal of Technology
Faced with ever-shrinking reserves of fossil-based energy, in addition to the damaging impacts of the use of fossil-based energy sources, such as the greenhouse effect and global warming, efforts are needed to find energy alternatives. Currently under development as an alternative source of renewable energy, utilizing solar energy as its source, is a device incorporating the dye-sensitized solar cell (DSSC), which works using the simple photosynthetic-electrochemical principle at the molecular level. In this type of device, inorganic oxide semiconductors such as titanium dioxide (TiO2) offer great potential for the absorption of photon energy from the solar energy source, especially in the form of a TiO2 nanoparticle structure. In this study, a commercial TiO2 nanoparticle was used. The as-received TiO2 nanoparticle was characterized using X-ray diffraction (XRD) and a scanning electron microscope (SEM). For sensitizer, a natural dye extracted from mangosteen (Garcinia mangostana L.) pericarps was used. The extracted natural dye was characterized using Fourier transform infrared (FTIR) for the functional groups, whereas ultraviolet-visible (UV-Vis) was used to examine the absorption activity of the extracted natural dye. Performance of the DSSC was analyzed through a precision current versus potential difference (I-V) curve analyzer. The maximum power conversion efficiency (PCE) of the mangosteen natural dye was obtained using ethanol containing 20% distilled water as compared to commercial organic dye with a PCE of 4.02%. This result is convincing and promising for the next development.
25 July 2025 in Materials for Renewable and Sustainable Energy
In this work, titanium dioxide nanoparticles (TiO₂ NPs) were green-synthesized using jasmine (Jasminum sambac) flower extracts as the medium with different solvent variation concentrations. The green synthesis was carried out using titanium isopropoxide (TTIP) as a precursor via the sol-gel method. The obtained TiO₂ NPs were characterized using infrared spectroscopy (FTIR), ultraviolet spectroscopy (UV-DRS), X-ray diffraction (XRD), field emission scanning electron microscopy/energy dispersive X-ray spectroscopy (FESEM/EDX), Raman spectroscopy, and high-resolution transmission electron microscopy/selected area diffraction (HRTEM/SAED). The characterization revealed that the green-synthesized TiO₂ NPs possess a pure tetragonal anatase phase, which belongs to the space group I41/amd. Dye-sensitized solar cell devices were further fabricated using the obtained TiO₂ NPs and sensitized with the commercial dye N719 and a kesumba (Bixa orellana) seed extract as an alternative, inexpensive, yet sustainable natural dye. The highest efficiency of 2.52% was obtained from TiO₂ NPs sensitized using commercial dye N719 and synthesized using jasmine flower extract containing 30% acetylacetone, followed by one containing 50% acetylacetone, which is higher than that of commercial TiO₂ (0.80%). The same materials sensitized using kesumba seed extract resulted in efficiency of 0.22%, 0.08%, and 1.22%, respectively. These findings offer insight and pave the way for more novel, environmentally friendly methods for developing green-synthesizing nanomaterials and natural dye derivatives, ultimately contributing to a sustainable future.
30 October 2022 in Eastern-European Journal of Enterprise Technologies
The work provides the more comprehensive development of Liquid Smoke from Rice Husks Ash (RHA). Notably, the study focuses on the interaction between the primary molecules of inhibitor and mild steel, including thermodynamic calculation and surface treatment upon addition of inhibitor. The electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PP) characterization were utilized to evaluate the anticorrosion of RHA. The Raman Spectroscopy pre and post-addition of RHA’s inhibitor were used to compare the adsorbed functional group of inhibitors. Moreover, the thermodynamic calculation of the inhibitor’s adsorption determines the types of adsorption of the inhibitor. As a result of the adsorption process, the Scanning Electronic Microscope-Energy Dispersive X-Ray (SEM-EDX) aided by The Atomic Force Microscopy (AFM) and Contact Angle Test was implemented to unveil the surface treatment and the change of elemental composition after the addition of an 80 ppm inhibitor. The PP and EIS results show a significant depression of the current density at ‒2.75 μA·cm2 in 80 ppm solution with the highest inhibition efficiency of 99.82 %. The superior inhibition correlates to the adsorption of Si–OH, C–C, C–O–C, >C=O, complex structure, and –OH at wavenumber 458, 662, 1095, 1780, and 3530 cm-1. The LS shows a significant surface area of protection of 0.9982 and high adsorption constant (Kads) at 11.648. The calculated ΔGads of ‒6.59 kJ/mol unveils the chemisorption in nature. At the same time, a combination of 20 and 80 ppm solution is predicted adsorbed horizontally to reduce the contact between the solution and substrate, as shown in SEM and AFM results. It also increases the contact angle and their corresponding hydrophobicity