The high degree of variability among suppliers and types of biomasses hinders their application in energy production. Investigation into this drawback is needed for the use of the waste produced from açaí depulping, which is widely available throughout the Amazonia. This work aimed to analyze the variability of the yield and physical properties of the açaí waste among different Amazonian producers located at Macapá, AP, Brazil. In addition, energetic attributes of different waste components, namely, seeds and lignocellulosic fibers, were compared to determine if they should be separated prior to burning or pyrolysis. The average yield (71.0%–95.0%), dry basis moisture content (66.6%–76.2%), and basic density (0.753 g cm−3 to 0.812 g cm−3) of açaí waste varied remarkably among the suppliers. Fibers and seeds depicted similar higher heating values (19.91 MJ kg−1 and 19.32 MJ kg−1) and fixed carbon (21.39% and 21.50%) and volatile matter (77.32% and 76.65%), while the ash content was slightly lower for seeds (1.29%–2.08%) in comparison to fibers (1.85%–2.63%). Thermogravimetric analysis revealed different initial degradation temperatures and mass loss rates for the seeds and fibers. It was concluded that the yield and physical properties of açaí waste varied remarkably among providers. A drying process should be carried out before açaí waste burning due to its high moisture content. The high basic density is an advantageous feature of açaí waste in the context of bioenergy. Separation of the components is recommended prior to pyrolysis to avoid heterogeneous charcoal.
31 May 2021 in International Journal of Environmental Science and Technology
The gradual development of government policies for ecological transition in the modern construction sector leads researchers to explore new alternative and low environmental impact materials with a particular focus on bio-sourced materials. In this perspective, the mechanical, thermal insulation, and the sound absorption performances of a spent coffee grounds/potato starch bio-based composite were analyzed for potential application in buildings. Based on thermal conductivity and diffusivity tests, the coffee grounds waste biocomposite was characterized as an insulating material comparable with conventional thermal insulation materials of plant origin. Acoustical tests revealed absorption coefficients in the same range as other conventional materials used in building acoustical comfort. This bio-sourced material presented a sufficient compressive mechanical behavior for non-load-bearing structures and a sufficient mechanical capacity to be shaped into building bricks. Mechanical, thermal, and acoustic performances depend on the moisture environment. The groundwork was laid for an initial reflection on how this composite would behave in two opposite climates: the continental climate of Reims in France and the tropical climate of Belém in Brazil.
4 November 2020 in Biomass Conversion and Biorefinery