3 April 2024 in Construction and Building Materials
1 May 2021 in Ceramics International
18 May 2017 in IOP Conference Series: Earth and Environmental Science
Munroe effect has been more and more used in blasting engineering and most assembling energy technologies use a shaped charge device. In this paper, a new method is used to achieve detonation wave collision by detonating cord initiation system. A numerical simulation using LS-DYNA on detonation wave propagation and collision process caused by different initiation forms is implemented. Numerical results show that peak pressure by this new method can reach 2.42 times than the traditional method, and the growth of specific impulse at the explosive bottom is 49% compared to early results. Based on this numerical simulation, an experiment of explosive-determination of power be implemented, the experiment result can verify the simulation result well.
1 October 2017 in Shock and Vibration
It is difficult to use industrial explosives to excavate hard rock and achieve suitable blasting effect due to the low energy utilization rate resulting in large rocks and short blasting footage. Thus, improving the utilization ratio of the explosive energy is important. In this study, a novel bilinear initiation system based on hard rock blasting was proposed to improve the blasting effects. Furthermore, on the basis of the detonation wave collision theory, frontal collision, oblique reflection, and Mach reflection during detonation wave propagation were studied. The results show that the maximum detonation pressure at the Mach reflection point where the incident angle is 46.9° is three times larger than the value of the explosive complete detonation. Then, in order to analyze the crack propagation in different initiation forms, a rock fracture test slot was designed, and the results show that bilinear initiating system can change the energy distribution of explosives. Finally, field experiment was implemented at the hard rock pile blasting engineering, and experimental results show that the present system possesses high explosive energy utilization ratio and low rock fragments size. The results of this study can be used to improve the efficiency in hard rock blasting.