1 October 2021 in Solar Energy Materials and Solar Cells
28 August 2025 in ACS Energy Letters
ABAlexander J. Baldacchino
+16
22 December 2022 in IEEE Journal of Photovoltaics
The recombination of photogenerated charge carriers at metal-semiconductor interfaces remains a major source of efficiency loss in photovoltaic cells. Here, we present SiN x and AlO x nanolayers as promising interface dielectrics to enable high efficiency hole selective passivating contacts. It is demonstrated that SiN x deposited via direct plasma enhanced chemical vapour deposition can be grown controllably at thicknesses of 2 nm. The valence band offsets between crystalline silicon and ultrathin AlO x and SiN x nanolayers are measured as 3.5 and 1.4 eV, respectively. This predicts a larger tunnelling current for holes, compared to SiO x used typically. Resistivity measurements show that SiN x and AlO x nanolayers have lower contact resistivities compared to SiO x , with values as low as 100 mΩ·cm 2 . Analysis of the current transport mechanisms confirmed that tunnelling dominates the conduction through SiN x , while a mixture of tunnelling and pinholes are present in the AlO x structure. Lifetime measurements gave initial indications of the passivation quality of the films, with just 10 cycles of AlO x achieving 260 μ s after annealing and 1.9 ms with extrinsic field effect passivation added. Finally, the intrinsic built-in charge in the dielectrics was determined using surface photovoltage measurements and simulations are used to estimate the influence of nanolayer built-in charge in both poly-Si and dopant-free passivating contacts to enable future high efficiency solar cells.
17 November 2024 in Solar Energy Materials and Solar Cells
28 November 2024 in Advanced Science
High‐efficiency solar cells require two contact structures, engineered for efficient extraction of photogenerated holes and electrons at the respective electrodes. Herein, crystalline Si solar cell featuring hole‐ and electron‐selective passivating contacts composed entirely of a single material, amorphous titanium oxide (TiOx), without extrinsic doping is demonstrated. The hole/electron selectivity of the TiOx layers (≈5 nm) is tailored by the oxidation process and the choice of Ti precursor in the atomic layer deposition (ALD). Ex situ and in situ X‐ray photoelectron spectroscopy measurements elucidate that the hole‐selective TiOx induces significant band bending in the Si (Φ≈0.7 eV), generating a p‐type inversion layer in the n‐Si absorber. The electron‐selective TiOx induces a smaller band bending of Φ<0.35 eV. This clarifies that the bipolar carrier selectivity of TiOx is associated with the different amount of negative fixed charges generated during the ALD process, depending on the choice of Ti precursor and oxidant. In addition, the growth of a hydrogen‐containing SiOy nanolayer (≈1‐1.5 nm) at the Si/TiOx interface during postdeposition oxidation is crucial for providing chemical passivation in both types of TiOx. These findings pave the way for a deeper understanding of the charge generation mechanism and chemistry at the Si/metal oxide interfaces.
3 July 2025 in Solar Energy Materials and Solar Cells