Shanshan Liu

Shanshan Liu

Auto-generated profile, based on publicly available information

Shanshan Liu

University of Electronic Science and Technology of China

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 June 2021 in IEEE Transactions on Aerospace and Electronic Systems
Verified
Journal Article
Closed access
JGJing Guo
Jing Guo
SLShanshan Liu
Shanshan Liu
XSXiaohui Su
Xiaohui Su
CQChunhua Qi
Chunhua Qi
FLFabrizio Lombardi
Fabrizio Lombardi
Latches areused extensivelyin digital circuits; however, as technology scaling reaches nanometric feature sizes, externally induced phenomena (such as radiation strikes in aerospace applications) may cause a single event upset (SEU) in either single or double nodes. Rather than masking, mitigation of an SEU is effectively achieved by recovering the correct value throughthe design of hardened latches. Using the polarity of the radiation-induced voltage pulse, a stacked design is proposed; this circuit permits to accomplish protection and SEU recovery at reduced overhead and so at substantially improved performance. The first proposed latch (RH-1) recovers all single node upsets and has an extremely low delay in its operation, because this latch propagates data to the output stage though only a transmission gate. The fast operation of RH-1 is utilized in the second latch (RH-2) proposed in this article. RH-2 consists of two RH-1 modules to guarantee that at least two nodes maintain the latched values under the occurrence of a double node upset. Simulation results are provided; they show that RH-1 (recovering all single node upsets and many double node upsets) has the best delay and power-delay-area product (PDAP, as combined metric) among all considered designs and the second-best area and dynamic power dissipation among the recovering schemes, and meanwhile RH-2 (recovering all double node upsets) has the best dynamic power dissipation and PDAP among all considered designs and the best area and delay among recovering schemes.

5 March 2024 in IEEE Transactions on Nanotechnology
Verified
Journal Article
Closed access
SLShanshan Liu
Shanshan Liu
Josep L. RossellóJosep L. Rosselló
Josep L. Rosselló
SLSiting Liu
Siting Liu
XTXiaochen Tang
Xiaochen Tang
JFJoan Font
Joan Font
FLFabrizio Lombardi
Fabrizio Lombardi
Stochastic Computing (SC) has the potential to dramatically improve important nanoscale circuit metrics, including area and power dissipation, for implementing complex digital computing systems, such as large neural networks, filters, or decoders, among others. This paper reviews the state-of-the-art design of important SC building blocks covering both arithmetic circuits, including multipliers, adders, and dividers, and finite state machines (FSMs) that are needed for numerical integration, accumulation, and activation functions in neural networks. For arithmetic circuits, we review newly proposed schemes, such as Delta Sigma Modulator-based dividers providing accurate and low latency computation, as well as design considerations by which the degree of correlation/decorrelation can be efficiently handled at the arithmetic circuit level. As for complex sequential circuits, we review classical stochastic FSM schemes as well as new designs using the recently-proposed dynamic SC to reduce the length of a stochastic sequence to obtain computation results. These stochastic circuits are compared to traditional implementations in terms of efficiency and delay for various levels of accuracy to illustrate the ranges of values for which SC provides significant performance benefits.

1 August 2020 in IEEE Transactions on Artificial Intelligence
Verified
Journal Article
Closed access
SLShanshan Liu
Shanshan Liu
Pedro ReviriegoPedro Reviriego
Pedro Reviriego
XTXiaochen Tang
Xiaochen Tang
WTWei Tang
Wei Tang
FLFabrizio Lombardi
Fabrizio Lombardi
Support Vector Machines (SVMs) are widely used in Machine Learning (ML) to perform classification. For a given element, an SVM computes a value using a kernel function and several support vectors to determine its class. Unfortunately, the computational units can be affected by externally induced phenomena such as soft errors; therefore, an erroneous result can be obtained. This is an issue when an SVM is used in safety-critical applications in which a change of the classification result is not acceptable. To ensure that errors do not change the classification result, traditional protection schemes can be used. For example, if the SVM computation is done on a processor, calculations can be executed twice, and the results get compared. If they are different, the error is detected, and the calculation can be done for a third time, voting can then be utilized to obtain the most likely result. However, this approach incurs in a large cost for computing resources and may not be acceptable when an SVM is used in resource constrained platforms such as Internet of Things (IoT) devices. In this paper, Result-based Re-computation (RBR) is proposed; RBR is an efficient technique to protect SVMs from errors in the kernel function, which is the most complex part in the SVM implementation. RBR is based on the observation that the SVM result is a sum of kernel terms to detect the terms that can modify the classification result and only these terms must be re-computed. The evaluation results using several publicly available datasets show that compared to a traditional protection scheme, the proposed RBR reduces up to 95.58% of the re-computation needed to protect an SVM against errors. Impact Statement-Error tolerance is critical in safety-critical Artificial Intelligence (AI) applications due to their dramatic consequences and safety implications. However, conventional protection solutions always incur in a large computational cost that could become prohibitive in resource-constrained platforms and application domains such as Internet of Things devices. The Algorithm-based Error Tolerance (ABET) approach for Support Vector Machines (SVMs) proposed in this paper has a significant advantage in terms of low computational demands. This advantage makes it very attractive in practice. The proposed algorithm reduces computational time with up to 95.58%, when compared to a classic protection scheme. This saving will promote the use of ABET approaches in industry, especially in embedded low-power systems.

20 June 2022 in IEEE Sensors Journal
Verified
Journal Article
Closed access
XTXiaochen Tang
Xiaochen Tang
SLShanshan Liu
Shanshan Liu
Pedro ReviriegoPedro Reviriego
Pedro Reviriego
FLFabrizio Lombardi
Fabrizio Lombardi
WTWei Tang
Wei Tang
Cardiovascular disease (CVD) has become the leading cause of death worldwide. As a widely used method for diagnosing CVD, currently electrocardiogram (ECG) monitoring tends to be implemented in wearable devices. This paper presents the prototype an ECG delineation and arrhythmia classification (EDAC) system suitable for wearable ECG biosensors. The proposed EDAC system is intended to be implemented after the electrodes and the analog front-end circuit, and its aim is signal processing at a low hardware overhead. The system consists of a Delta-modulator-based analog-to-feature converter (AFC), a corresponding ECG detection/delineation/feature extraction algorithm (DDF), an automatic gain controller (AGC) block, and a patient-dependent linear kernel support vector machine (SVM) classifier. The AFC converts the input analog signal into digital data of the slope and slope variation of the input signal, which is then used for detecting QRS complexes, localizing the fiducial points, and extracting the feature vectors for each heartbeat in the DDF block. At the same time, the AGC sends out a gain control signal based on the detected QRS complex to adjust the gain of the front-end amplifier. Finally, the SVM block performs arrhythmia classification. The EDAC system performance is evaluated using the MIT-BIH arrhythmia database. The system achieves 0.88% (0.93%), 99.1% (99.1%), 87.0% (92.8%), 99.6% (99.5%), and 89.3% (92.9%) in F1 score, accuracy, sensitivity, specificity, and positive predictive values of the supraventricular ectopic beats (ventricular ectopic beats) versus normal heartbeats classification while maintaining a low power dissipation ( $1.66~\mu \text{W}$ at 1 kHz operating frequency in the front-end AFC block). The proposed system is attractive to future wearable long-term ECG monitoring biosensors.

8 May 2018 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Verified
Journal Article
Closed access
XCXuebing Cao
Xuebing Cao
LXLiyi Xiao
Liyi Xiao
JLJie Li
Jie Li
RZRongsheng Zhang
Rongsheng Zhang
SLShanshan Liu
Shanshan Liu
JWJinxiang Wang
Jinxiang Wang
Radiation-induced single event transients (SETs) are expected to evolve to single event multiple transients (SEMTs) due to the downscaling of transistor feature size, which also increases the difficulty of the vulnerability estimation for large scale digital integrated circuits (ICs). In this paper, a novel layout-based soft error vulnerability estimation approach which is termed LBSEVEA is proposed to evaluate the impact of heavy ions on the vulnerability of combinational circuits. Moreover, the physical process of interaction between particles and devices, especially nuclear reaction and scattering process are included in the LBSEVEA. In addition, ambipolar diffusion and bipolar amplification effect, which induce additional charge collection of the adjacent transistors and the hitting transistor, are also considered. A new method calculating the collected charge induced by the bipolar amplification effect is presented. By introducing the layout information of the target circuits into the identification of the adjacent cells, SEMTs effect can be considered in the vulnerability estimation. A fast SPICE simulation tool is adopted to conduct the fault injected netlist simulations, which can make a favorable compromise between the consumption of computer resources and simulation precision. Furthermore, induced soft error numbers, distribution of charge collected by the hitting nodes and the adjacent nodes, and SET pulse width distributions are presented. Besides, heatmaps of induced pulse widths for the layout of two benchmark circuits are provided. Finally, the constraints, the flexibility and the scalability of the LBSEVEA are discussed. The ability to estimate the impact of process variations on the vulnerability is also presented. Compared with simulation and experimental results, the LBSEVEA can fairly estimate the vulnerability of the combinational circuit.

12 June 2019 in IEEE Transactions on Emerging Topics in Computing
Verified
Journal Article
Closed access
SLShanshan Liu
Shanshan Liu
Pedro ReviriegoPedro Reviriego
Pedro Reviriego
FLFabrizio Lombardi
Fabrizio Lombardi
Emerging memory technologies rely on Multilevel Cells (MLC) to achieve high density; the use of multiple levels per cell allows storage of multiple bits, but it also reduces the margins and makes it error prone. Error control codes (including error correction and detection codes) can be used to protect MLC memories from errors; however, most existing coding schemes have been designed for traditional binary memories (so storing a single bit). In MLC memories, errors cause a change from a level to an adjacent level or to the next one (depending on the employed technology), so they are often referred to as limited magnitude errors. For a binary coding of levels to bits, these limited magnitude errors can corrupt several bits making traditional coding schemes inefficient. In this paper, error detection of MLC memories is considered when a binary encoding of levels to bits is used and two new schemes are proposed: One-Bit Parity (OBP) and Two-Bit Parity (TBP). The first scheme targets errors of magnitude-1 for detection using a single parity bit that checks only one bit per cell. The second scheme detects both magnitude-1 and -2 errors using only two parity bits. Both schemes are compared to existing alternatives, namely Gray coding combined with a single parity bit (GP) for OBP and Interleaved Parity (IP) for TBP. The results show that OBP reduces the encoding and error detection circuitry complexity and delay, while TBP additionally reduces the number of parity bits for some configurations. Therefore, OBP and TBP can be efficient alternatives for detection of limited magnitude errors in MLC memories that use a binary encoding of levels to bits.