20 January 2023 in IEEE Antennas and Wireless Propagation Letters
This letter presents a higher-order finite-difference (FD) and Padé approximations method for the three-dimensional (3D) parabolic equation (PE) to predict radio-wave propagation. This method uses a 4 $^{\boldsymbol {th}}$ -order FD approximation of the differential operator in the transverse direction and a higher-order Padé approximation of the operator in the propagation direction. The 4 $^{th}$ -order FD and higher-order Padé (4FDHP) method is then derived. The Leontovich impedance boundary for the 4FDHP method and boundary for the 2 $^{nd}$ -order FD and higher-order Padé (2FDHP) method are also derived. The important problem of the propagation angle of the different approximations for the 3D-PE is investigated. Simulated results show that the proposed 4FDHP method achieves a larger propagation angle and higher accuracy than those of the 2FDHP method and the Mitchell-Fairweather alternative-direction-implicit (MF-ADI) method.
7 October 2020 in IEEE Antennas and Wireless Propagation Letters
In this letter, we propose a high-accuracy low-cost hybrid finite-difference time-domain (FDTD)/alternating-direction-implicit parabolic equation (ADI-PE) method for ultra-large-scale electromagnetic simulation on distributed computing platform. The hybrid method offers fast and precise 3D deterministic radio wave propagation predictions in a difficult-terrain scenario with specific detailed structures in both near-field and far-field. Since the typical parallel ADI-PE method suffers from high-frequency data communication between different calculation cores, which greatly discount simulation efficiency in bandwidth-constrained environments, we adopt a Woodbury formula based parallel algorithm to find inverse matrixes of tridiagonal matrixes so that implicit and explicit steps of the PE can be finished in local computing cores. Simulation results for Instrument Landing System (ILS) demonstrate the capability of the proposed method in achieving state-of-the-art performance.
22 March 2023 in International Journal of Antennas and Propagation
The alternating direction implicit parabolic equation (ADI-PE) method and the Crank–Nicolson parabolic equation (CN-PE) method have been widely used for solving the 3D parabolic equation (3D-PE) in radio wave propagation. The ADI-PE method is more computationally efficient than the CN-PE method. The accuracy of the ADI-PE method is improved by the higher-order Mitchell–Fairweather (MF)-ADI method. This paper presents an iterative high-accuracy (IHA)-ADI method for the 3D parabolic equation. A derivation of the proposed method is presented. The convergence and stability of the proposed method are estimated. Several numerical examples are considered to illustrate the advantages of the proposed method. The results of error analysis and a comparative study show that the proposed method is unconditionally stable and computationally efficient. The proposed method is more numerically accurate than the MF-ADI method.
18 October 2022 in TechRxiv
This letter presents a novel 3-D hybrid method for instrument landing system (ILS) channel modeling, which names half space multilevel fast multipole method - parabolic equation method (HSMLFMM-PE). The multilevel fast multipole method (MLFMM) is applied to simulate the source region and near source obstacles. The large scale obstacles, pertaining to the far field region, is implemented by the parabolic equation (PE) method. The transition plane between the MLFMM region and PE region is solved by the half plane Green’s function of the MLFMM to avoid the full wave simulation of the ground, thus the computation cost can be further reduced. Experimental results demonstrate that the computation cost of half space method is lower than full space method. The HSMLFMM-PE method can simultaneously meet the requirements of high simulation accuracy and the requirements of large area radio wave propagation computation in ILS simulation.
18 October 2022 in TechRxiv
The aircraft’s landing is guided by the instrument landing system (ILS). However, the guidance information may be disturbed by reflections from irregular terrain and obstacles. A sketch which restrains the multipath effect from irregular terrain and obstacles, is then required. This paper proposes a metallic reflective structure which aims at blocking the radio wave directly radiating to the terrain. The design of the structure size and location is based on the location of the obstacles and the radiation pattern of the antenna. Due to the fact that the scattering effect of the structure should be accurately simulated, the finite difference time domain - parabolic equation method (FDTD-PE) is applied in ILS and used to simulate the interaction of the scattering effect between the structure and the terrain. The experimental results show that the proposed method improves the multipath effect mitigation.