This work deals with the treatment of wood surfaces by diffuse coplanar surface barrier discharge (DCSBD) generated at atmospheric pressure. The effect of the distance of the sample from the electrode surface and the composition of the working gas in the chamber was studied. Norway spruce (Picea abies) wood, both unmodified and thermally modified, was chosen as the investigated material. The change in the surface free energy (SFE) of the wood surface was investigated by contact angles measurements. Chemical and structural changes were studied using infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). Activation at a 0.15 mm gap from the electrode led in all cases to an increase in the SFE. The largest change in SFE components was recorded for wood thermally modified to 200 °C. At a 1 mm gap from the electrode increase of SFE occurred only when oxygen (O2) and argon (Ar) were used as working gas. Treatment in air and nitrogen (N2) resulted in an anomalous reduction of SFE. With the growing temperature of thermal modification, this hydrophobization effect became less pronounced. The results point out the importance of precise position control during the DCSBD mediated plasma treatment. A slight reduction of SFE on thermally modified spruce was achieved also by short term ultra-violet (UV) light exposure, generated by DCSBD.
Graphite-based microcathodes have shown significant performance when operated as cold field emission electron sources. Specifically mentioned, cathodes that have been prepared from highly ordered pyrolytic graphite and polymer graphite pencil leads. Such cathodes are characterized by low operating voltages, a long lifetime, a cheap fabrication price, and a stable emission current. Recently, it was shown that polymer graphite cold field emission cathodes have a unique quasi-harmonic field emission behavior, where the process included emission of pulses of electrons with relatively higher emission current values. However, this behavior has not been reported for other graphite-based materials. In this paper, we study the effects of the polymer binding agent on the charge carriers’ flow through the surface of polymer graphite using Raman-current spectroscopy. The results from polymer graphite were then compared to cathodes prepared from colloidal graphite conductive paint when deposited on a glass substrate. The results showed that the I(D)/I(G) ratio of polymer graphite had a fluctuating behavior, which was not the case for colloidal graphite, which had a more stable structure.