1 March 2019 in Applied Energy
1 November 2016 in Energy and Buildings
This paper presents a model based on dynamic material flow analysis, general in its principles and applied to the dwelling stock of Norway for exemplification. The algorithm at the core of the model is presented in the form of a pseudo-code and is described in detail. The driving force in the model is a population’s need for housing and the necessary input are retrievable from national statistics on population, often dating back to around 1800, and its prognoses up to 2050 or beyond. Technical parameters such as the dwellings’ lifetime and the renovation cycles are expressed by probability functions. Outputs of the model are the flows of construction, demolition and renovation; analysis of the renovation activity is given particular attention. The model shows how the renovation rates are a result of the need for maintenance of an ageing stock, and provides quantitative estimates of the present and future natural renovation rates, i.e. without specific incentives. The paper shows how to validate the model against statistics and other data sources, and how to use the model’s future projections on construction, demolition and renovation activities in scenario based analyses of dwelling stocks’ energy demand and greenhouse gases emissions
4 January 2024 in Energy and Buildings
13 April 2023 in Data in Brief
The data presented here were collected independently for 6 real buildings by researchers of different institutions and gathered in the context of the IEA EBC Annex 81 Data-driven Smart Buildings, as a joint effort to compile a diverse range of datasets suitable for advanced control applications of indoor climate and energy use in buildings. The data were acquired by energy meters, both consumption and PV generation, and sensors of technical installation and indoor climate variables, such as temperature, flow rate, relative humidity, CO2 level, illuminance. Weather variables were either acquired by local sensors or obtained from a close by meteorological station. The data were collected either during normal operation of the building, with observation periods between 2 weeks and 2 months, or during experiments designed to excite the thermal mass of the building, with observation periods of approximately one week. The data have a time resolution varying between 1 min and 15 min; in some case the highest resolution data are also averaged at larger intervals, up to 30 min.
13 August 2019 in E3S Web of Conferences
Widespread introduction of low energy buildings (LEBs), passive houses, and zero emission buildings (ZEBs) are national target in Norway. In order to achieve better energy performance in these types of buildings and successfully integrate them in energy system, reliable planning and prediction techniques for heat energy use are required. However, the issue of energy planning in LEBs currently remains challenging for district heating companies. This article proposed an improved methodology for planning and analysis of domestic hot water and heating energy use in LEBs based on energy signature method. The methodology was tested on a passive school in Oslo, Norway. In order to divide energy signature curve on temperature dependent and independent parts, it was proposed to use piecewise regression. Each of these parts were analyzed separately. The problem of dealing with outliers and selection of the factors that had impact of energy was considered. For temperature dependent part, the different methods of modelling were compared by statistical criteria. The investigation showed that linear multiple regression model resulted in better accuracy in the prediction than SVM, PLS, and LASSO models. In order to explain temperature independent part of energy signature the hourly profiles of energy use were developed.