9 April 2024 in IEEE Transactions on Electromagnetic Compatibility
The 12-phase rectifier circuit has been widely used in ships, subways, and other systems due to its advantages of high voltage level and high power capacity. As the voltage and current levels, the power capacity increases, leading to higher levels of ${{dv}/ {dt}}$ and ${{di} / {dt}}$ , and electromagnetic interference (EMI) becoming increasingly significant. Therefore, it is pivotal to study the mechanism of conducted EMI in the 12-phase rectifier circuit to establish the foundation for the targeted EMI suppression. At present, there is scarce literature on the generation mechanism of conducted EMI in the rectifier circuit with more than three phases . In addition, there is no existing prediction method for conducted EMI in a 12-phase rectifier circuit combined with the actual switching waveform. Therefore, this article proposes a conducted EMI modeling method for arbitrary 12-phase rectifier circuits with the actual switching waveform based on state transition. This method can not only give the theoretical calculation model of differential mode (DM) and common mode (CM) conducted EMI but also achieve the quantitative prediction of DM and CM conducted EMI combined with the actual switching process. A 12-phase rectifier module is taken as an example to validate the proposed method through circuit simulation and experiment. Furthermore, the influence of unbalanced impedance and the unbalanced power supply on the EMI of the 12-phase rectifier circuit is analyzed. Unbalanced impedance will result in more high-frequency harmonics for the DM, and the unbalanced power supply voltage will result in more high-frequency harmonics for both the DM and CM.
1 January 2026 in IEEE Transactions on Industrial Electronics
23 December 2024 in IEEE Access
Electromagnetic launch (EML) systems with energy storage units in transient operating states are gradually being applied in modern ships, satellite launches, etc., power switching devices with higher voltage and switching frequency, Additionally, innovative topologies are being developed to enhance the electromagnetic performance of the EML systems. This inevitably leads to significant EMI issues. Therefore, this paper proposes a transient conducted EMI source modeling method for EML systems based on a multi-port equivalent circuit cascade model. Initially, a multi-port transient conducted EMI source model for supercapacitors is developed, taking into account the time-varying load characteristics of supercapacitors during charging and transient high-current discharge characteristics during discharging. Subsequently, a multi-port transient conducted EMI source model of the dual three-phase linear motor has been developed utilizing experimental measurement data. Leveraging the port-to-port cascade characteristics of various devices in the EML system, a dual three-phase dc-ac inverter multi-port conducted EMI model with high-frequency parasitic effects has been developed. A system-level modeling method based on the multi-port equivalent circuit cascade transient conducted EMI source modeling method is developed by cascading the multi-port equivalent circuit models of each functional component for the EML system. To evaluate the accuracy of this system-level modeling method, an experimental setup is constructed to assess transient conducted EM disturbances in a low-power EML system. The time-domain simulation results of the transient operating state are compared and analyzed with the actual operating conditions from the voltage, current, and energy perspectives, further validating the accuracy and efficacy of the EML system conducted EMI source modeling method based on a cascade of multi-port equivalent circuit models, as well as the transient conducted EM disturbances time-domain and frequency-domain characteristics.