The energy harvesting efficiency is of tremendous importance for the realization of a high output-power nanogenerator serving as the basis for self-powered electronics. Here we report that the device performance of a sound-driven piezoelectric energy nanogenerator (SPENG) is remarkably improved by controlling both the carrier density and the interfacial energy in a semiconducting ZnO nanowire (NW), thereby achieving its intrinsic efficiency limits. A SPENG with carrier-controlled ZnO NWs exhibits excellent energy harvesting characteristics with an average power density of 0.9 mW cm−3, as well as a near 50 fold increase in both output voltage and current compared to those of a conventional ZnO NW. In addition, we demonstrate for the first time that an optimized SPENG is large enough and very suitable to drive electrophoretic ink displays based on voltage-drive systems. This fundamental progress makes it possible to fabricate high performance nanogenerators for viable industrial applications in portable/wearable personal electronics such as electronic papers and smart identity cards.
The integration of electronically active oxide transistors onto silicon circuits represents an innovative approach to improving the performance of devices. In this paper, we present high performance oxide transistor for use as gate drive circuitry integrated on top of a power electronic device, providing a novel power system. Specifically, as a core device component in gate driver, oxide transistor exhibits remarkable performance such as, high mobility (23~47cm 2 /Vs) and high breakdown voltage (BV) of 60~340V despite low process temperatures (<;300°C). In addition, we demonstrate the dynamic behavior of the inverter and the latch produced by oxide transistor and thus a complete and functioning gate drive circuitry can be implemented on top of power management integrated circuit (PMIC) as depicted in the report.
1 November 1996 in IEEE Journal of Solid-State Circuits
In this paper, we present a 2 nd -generation 2D/3D imager based on the pinned- photodiode pixel structure. The time-division readout architecture for both image types (color and depth) is maintained. A complete redesign of the imager makes pixels smaller and more sensitive than before. To obtain reliable depth information using a pinned-photodiode, a depth pixel is split into eight small pieces for high-speed charge transfer, and demodulated electrons are merged into one large storage node, enabling phase delay measurement with 52.8% demodulation contrast at 20MHz frequency. Furthermore, each split pixel gener- ates its own color information, offering a 2D image with full-HD resolution (1920x1080).
15 November 2003 in Journal of the Korean Physical Society