24 July 2020 in Optics Express
In this paper, low frequency noise and dark current correlation is investigated as a function of reverse bias and temperature for short-wave infrared (SWIR), mid-wave infrared (MWIR), and long-wave infrared (LWIR) HgCdTe homo-junction photodetectors. Modelling of dark current-voltage characteristics shows that the detectors have ohmic-behavior under small reverse bias, thus enabling further analysis of 1/f noise-current dependences with the empirical square-law relation (S
I
∼ I2) at different temperature regions. It is found that for the SWIR and MWIR devices, the total 1/f noise spectral density at arbitrary temperatures can be modelled by the sum of shunt and generation-recombination noise as , with no contribution from the diffusion component observed. On the other hand, for the LWIR device the diffusion component induced 1/f noise that cannot be overlooked in high temperature regions, and a 1/f noise-current correlation of is proposed, with a shared noise coefficient of α
s
≅ 1 × 10−9 which is close to that calculated for shunt noise. The 1/f noise-current correlation established in this work can provide a powerful tool to study the low frequency noise characteristics in HgCdTe-based photodetectors and to help optimizing the “true” detectivity of devices operating at low frequency regime.
20 November 2020 in Optics Express
High-speed mid-wave infrared (MWIR) photodetectors have important applications in the emerging areas such high-precision frequency comb spectroscopy and light detection and ranging (LIDAR). In this work, we report a high-speed room-temperature mid-wave infrared interband cascade photodetector based on a type-II InAs/GaSb superlattice. The devices show an optical cut-off wavelength around 5 µm and a 3-dB bandwidth up to 7.04 GHz. The relatively low dark current density around 9.39 × 10−2 A/cm2 under −0.1 V is also demonstrated at 300 K. These results validate the advantages of ICIPs to achieve both high-frequency operation and low noise at room temperature. Limitations on the high-speed performance of the detector are also discussed based on the S-parameter analysis and other RF performance measurement.
13 July 2020 in IEEE Photonics Technology Letters
In this paper, InP based near infrared (NIR) /extended-short wave infrared (eSWIR) dual-band photodetector with In 0.53 Ga 0.47 As and In 0.53 Ga 0.47 As/GaAs 0.5 Sb 0.5 type-II superlattice (T2SL) back-to-back n-i-p/p-i-n structures is demonstrated. Monolithic growth of NIR/eSWIR dual-band photodetector on InP substrate enjoys the benefit of the lattice matched property of InP/InGaAs/GaAsSb material system. Low optical crosstalk (below −10 dB) between the two sub-detector is achieved for wavelength range out of 1690–1750 nm. At room temperature, the device exhibits a dark current density of $1.26\times 10 ^{\mathbf {-5}}$ A/cm 2 for In 0.53 Ga 0.47 As sub-detector under −0.1 V bias and $3.78\times 10 ^{\mathbf {-2}}$ A/cm 2 for In 0.53 Ga 0.47 As/GaAs 0.5 Sb 0.5 sub-detector under −1 V bias. The corresponding responsivity and specific detectivity are 0.57 A/W and $2.63\times 10 ^{\mathbf {11}}$ cm $\cdot $ Hz $^{\mathbf {1/2}}$ /W at 1640 nm for NIR sub-detector and 0.22 A/W and $1.96\times 10 ^{\mathbf {9}}$ cm $\cdot $ Hz 1/2 /W at $2~\mu \text{m}$ for eSWIR sub-detector, respectively. The characterization results show the potential for monolithically growing dual-band SWIR photodetector on InP substrate with low dark current density for SWIR applications.
31 October 2019 in Journal of Lightwave Technology
High-speed mid-wave infrared (MWIR) photodetectors have applications in the areas such as free space optical communication and frequency comb spectroscopy. However, most of the research on the MWIR photodetectors have been focused on how to increase the quantum efficiency and reduce the dark current, in order to improve the detectivity (D*), and the 3dB bandwidth performance of the corresponding MWIR photodetectors is still not fully studied. In this work, we report and characterize a MWIR interband cascade photodetector based on InAs/GaAsSb type-II superlattice with a 50% cutoff wavelength at ~5.3 μm at 300 K. The 3 dB cutoff frequency is 2.4 GHz at 300 K, for a 40 μm circular diameter device under -5 V applied bias. Limitations on the detector high-speed performance are also discussed.