22 October 2020 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Interposer-based 2.5D integrated circuits (ICs) enable the chip-level reuse of hard intellectual properties (IPs), also known as chiplets. Such system-level integration shortens the design cycle considerably for large-scale and heterogeneous chips. Besides traditional interposers, which only provide passive elements and routing, active interposers are furthermore comprised of logic components. When implemented carefully using a dedicated electronic design automation (EDA) flow, an active interposer can significantly improve the design quality and flexibility for 2.5D ICs. In this paper, we present a complete EDA flow and design strategies targeting such active interposerbased 2.5D ICs. Our key contributions include the co-analysis of power, performance, signal and power integrity, and the related co-optimization of chiplets and the active interposer. Our benchmark is a 64-core RISC-V architecture, organized into multiple chiplets and interconnected by a system-level networkon- chip (NoC). For efficiency, we embed the NoC routers and integrated voltage regulators (IVRs) into the active interposer. Moreover, we integrate security monitors into the interposerbased NoC to protect the system and its shared memories against adversarial traffic. The simple yet powerful benefit of this implementation is to offer security by construction, as it is based on a clear physical separation between critical and trusted components (the system-level NoC) versus commodity components (the chiplets). We contrast our active, secured design to a passive, unsecured design baseline of the same RISC-V benchmark, and we find that the active design reduces the silicon area by 18.5%, power by 3.2%, and IR-drop by 73.7%, respectively.
12 August 2020 in IEEE Transactions on Electromagnetic Compatibility
One of the favorable tools for signal integrity evaluation is eye diagram analysis. This is traditionally performed with a lengthy transient simulation, which can be prohibitively time consuming for complex high-speed channels with a low bit error rate. Methods for eye estimation exist; however, they are either only applicable to linear time-invariant systems or have lack in accuracy or efficiency. In this article, an optimization-based approach is proposed to quickly obtain the worst-case eye diagram characteristics. This approach focuses on the inter-symbol interference since its effect can span over many symbols and include crosstalk, making it challenging to model. In this article, the data patterns leading to the lowest voltage corresponding to a high symbol, the highest voltage corresponding to a low symbol, and the times of minimum and maximum level crossing points are calculated. Then, eye height, eye width, and the worst-case eye opening are estimated using these points. To reduce complexity, the proposed approach includes a mapping algorithm that exploits the Gray code. Additionally, Bayesian optimization is used because of its efficiency and good performance on non-linear and non-convex problems. Finally, the application of the proposed approach to high-speed SerDes channels, and channels in system-on-package designs is evaluated with numerical examples, where the results show its accuracy and efficiency.
1 April 2019 in IEEE Access
Estimation of jitter and eye diagram in high-speed serial channels can be challenging. Existing methods might fail to show inter-symbol interference (ISI) and data dependent jitter because they are either excessively time consuming or only applicable to linear time invariant (LTI) systems. Therefore, this work suggests a hybrid methodology to develop surrogate models of the system from a short transient simulation and using them to efficiently determine the eye diagram and related parameters. This work is based on uncertainty quantification techniques that use polynomial chaos (PC) expansions to estimate the output. Necessary modifications are applied to PC modeling to make it applicable to high-speed channels. Finally, the performance of the proposed approach is shown through numerical examples.
24 February 2021 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
The 2-D CMOS process technology scaling may have reached its pinnacle, yet it is not feasible to manufacture all computing elements at lower technological nodes. This has opened a new branch of chip designing that allows chiplets on different technological nodes to be integrated into a single package using interposers, the passive interconnection mediums. However, establishing a high-frequency communication over an entirely passive layer is one of the significant design challenges of 2.5-D systems. In this article, we present a robust clocking architecture for a 2.5-D system consisting of 64 processor cores. This clocking scheme consists of two major components, namely, interposer clocking and on-chiplet clocking. The interposer clocking consists of clocks used to achieve global synchronicity and clocks for interchiplet communication established using the AIB protocol. We synthesized these clocking components using commercial EDA tools and analyzed them using standard tools, on-chip, and package models. We also compare these results against a 2-D design of the same benchmark and another 2.5-D clocking architecture. Our experiments show that the absolute clock power is up to 16% less, and the ratio of clock power to system power is up to 4% less in the 2.5-D design than its 2-D counterpart.
22 February 2023 in IEEE Letters on Electromagnetic Compatibility Practice and Applications
Design of high-speed channels has become increasingly more complicated. Due to the eye diagram closure at higher speeds, designers use Tx equalization by placing a finite impulse response (FIR) filter at Tx. Assigning the FIR tap values can be time consuming and require domain expertise since it can require sweeping hundreds or more combinations of tap values. Therefore, in this letter, we propose a machine learning optimization approach to find the FIR tap values which result in the largest eye opening. Conventional optimization techniques may not be applicable in this context since specifications of the channel can require a constraint, which is the sum of the absolute value of the FIR taps needs to be equal to 1. Therefore, we have developed a simplified constrained Bayesian optimization (BO) approach that can automate this process and expedite calculation of the FIR tap values without requiring domain expertise. Numerical examples are provided to show efficiency of the proposed approach and compare its performance with BO and genetic algorithm for this problem.