Interest in measuring displacement gradients, such as rotation and strain, is growing in many areas of geophysical research. This results in an urgent demand for reliable and field-deployable instruments measuring these quantities. In order to further establish a high-quality standard for rotation and strain measurements in seismology, we organized a comparative sensor test experiment that took place in November 2019 at the Geophysical Observatory of the Ludwig-Maximilians University Munich in Fürstenfeldbruck, Germany. More than 24 different sensors, including three-component and single-component broadband rotational seismometers, six-component strong-motion sensors and Rotaphone systems, as well as the large ring laser gyroscopes ROMY and a Distributed Acoustic Sensing system, were involved in addition to 14 classical broadband seismometers and a 160 channel, 4.5 Hz geophone chain. The experiment consisted of two parts: during the first part, the sensors were co-located in a huddle test recording self-noise and signals from small, nearby explosions. In a second part, the sensors were distributed into the field in various array configurations recording seismic signals that were generated by small amounts of explosive and a Vibroseis truck. This paper presents details on the experimental setup and a first sensor performance comparison focusing on sensor self-noise, signal-to-noise ratios, and waveform similarities for the rotation rate sensors. Most of the sensors show a high level of coherency and waveform similarity within a narrow frequency range between 10 Hz and 20 Hz for recordings from a nearby explosion signal. Sensor as well as experiment design are critically accessed revealing the great need for reliable reference sensors.
Recent progress in rotational sensor technology has made it possible to directly measure rotational ground-motion induced by seismic waves. When combined with conventional inertial seismometer recordings, the new sensors allow one to locally observe six degrees of freedom (6DOF) of ground-motion, composed of three orthogonal components of translational motion and three orthogonal components of rotational motion. The applications of such 6DOF measurements are manifold—ranging from wavefield characterization, separation, and reconstruction to the reduction of non-uniqueness in seismic inverse problems—and have the potential to revolutionize the way seismic data are acquired and processed. However, the seismological community has yet to embrace rotational ground-motion as a new observable. The aim of this paper is to give a high-level introduction into the field of 6DOF seismology using illustrative examples and to summarize recent progress made in this relatively young field. It is intended for readers with a general background in seismology. In order to illustrate the seismological value of rotational ground-motion data, we provide the first-ever 6DOF processing example of a teleseismic earthquake recorded on a multicomponent ring laser observatory and demonstrate how wave parameters (phase velocity, propagation direction, and ellipticity angle) and wave types of multiple phases can be automatically estimated using single-station 6DOF processing tools. Python codes to reproduce this processing example are provided in an accompanying Jupyter notebook.
Thawing of mountain permafrost in response to rising temperatures degrades the stability of rock walls and thereby affects infrastructure integrity in Alpine terrain. In this study, we use 15 yr of passive seismic data from a single station deployed near a known permafrost body on Mt. Zugspitze (Germany), to monitor freeze‐thaw processes. The recordings reveal a persistent cultural seismic noise source, which we utilize to compute single‐station cross‐correlations and extract relative seismic velocity changes. We find that parts of the cross‐correlations show seasonal velocity variations (≈3% peak‐to‐peak amplitude) and a long‐term velocity decrease (≈0.1%/yr). Comparison with meteorological data and a previous electrical resistivity tomography study suggests that these velocity changes are caused by freeze‐thaw cycles and by permafrost degradation, respectively. The results demonstrate the potential of passive seismology for permafrost monitoring and suggest that denser instrumentation will provide detailed spatio‐temporal insights on permafrost dynamics in future studies.
The unique instrument setting at the Piñon Flat Observatory in California is used to simultaneously measure 10 out of the 12 components, completely describing the seismic‐wave field. We compare the direct measurements of rotation and strain for the 13 September 2015 Mw 6.7 Gulf of California earthquake with array‐derived observations using this configuration for the first time. In general, we find a very good fit between the observations of the two measurements with cross‐correlation coefficients up to 0.99. These promising results indicate that the direct and array‐derived measurements of rotation and strain are consistent. For the array‐based measurement, we derived a relation to estimate the frequency range within which the array‐derived observations provide reliable results. This relation depends on the phase velocity of the study area and the calibration error, as well as on the size of the array.
Near‐field recordings of large earthquakes and volcano‐induced events using traditional seismological instrumentation often suffer from unaccounted effects of local tilt and saturation of signals. Recent hardware advances have led to the development of the blueSeis‐3A, a very broadband, highly sensitive rotational motion sensor. We installed this sensor in close proximity to permanently deployed classical instrumentation (i.e., translational seismometer, accelerometer, and tiltmeter) at the Hawaiian Volcano Observatory (USGS). There, we were able to record three ~Mw 5 earthquakes associated with large collapse events during the later phase of the 2018 Kīlauea summit eruption. Located less than 2 km from the origins of these sources, the combined six‐axis translational and rotational measurements revealed clear static rotations around all three coordinate axes. With these six component recordings, we have been able to reconstruct the complete time history of ground motion of a fixed point during an earthquake for the first time.